Home » » P16 SERIES

P16 SERIES


P16 SERIES

Construction
  • Cast iron pumping sections for durability

    P16 SERIES

    Construction
    • Cast iron pumping sections for durability
  • Aluminum body and flange for excellent power to weight ratio
  • Journal bearings for long life and good over-hung load capacity
  • Buna-N seals are standard for petrolium & glycol based fluids - "Viton®" seals are optional
  • Preasuse balanced plates for greater efficiency
Available Configurations
  • P16 - Standard
  • TP16 - Tandem, 2 and 3 Place
  • PVP16 - Priority Vavle
  • CP16 - Clutch Pump, "V" Belt and Serpintine
  • TP-PVP - Combination P16 with Priority Vavle
  • PB16-P12 - Piggy Back
  • HP16 - High Preasure
  • THP16 - Tandem High Preasure
  • FPR16 - Cast Iron, Bi-directional
P16, TP16, PVP16, CP16, TP16-PVP16 Models
  • Fluid displacements to 3.9 cir (63.9 ccr) 
  • Preasures to 3000 psi (206 bar)
  • Flow range to 38 gpm (143.8 lpm) per section,  the TP16 is 32 gpm (121 lpm)
  • Prioity Flow range 2 to 10 gpm (7.5-37.8 lpm) standard (PVP16 only)
PB16-P12 Model
  • Flow ranges
    • Front pump to 42 gpm (158.9 lpm)
    • Rear pump to 42 gpm (158.9 lpm)
  • Displacements
    • Rear pump to 0.90 cir (14.3 ccr) 
  • Preasures
    • Front pump to 3000 psi (206 bar)
    • Rear pump to 2500 psi (172 bar)
HP16 & THP16 Models
  • Displacements to 4.8 cir (79.8 ccr) 
  • Preasures to 3100 psi (213 bar)
  • Flow range to 46 gpm (174 lpm) per section THP16 - 42 (158.9 lpm) per section
FPR16 Model
  • Displacements to 3.902 cir (63.9 ccr)
  • Preasures to 3000 psi (206 bar)
  • Flow range to 42 gpm (159 lpm) per section
  • All cast iron construction

Product Category Selection

Share this article :

Posted by: rudy wiratama

wiratama Updated at: 02.02


 
Support : Rudy Wiratama | Johnytemplate
Copyright © 2010. Wiratama flow meter and technical part stock - All Rights Reserved
Template Created by. Creating Website Modified by Rudy Wiratama
Proudly powered by Blogger