Delta Oil Burner

.The study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase of their performance.
The experimentation of the new technical solutions and the very stringent reliability tests which every new product is subjected to, guarantee the safety and the quality of all products introduced into the market.
The accumulation of experience and knowhow achieved through many years of activity are always the starting point for every new
project.
A, AD TYPE
Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a pumping unit integrated in a cast iron housing, connected to an aluminium pressure die casting distributor. It is provided with bidirectional nozzle ports, pressure […]

VU TYPE
The DELTA Universal Fuel Unit is an efficient and modern oil pump, designed for pumping oil in high pressure oil burners and transfer pump applications. The mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), and the same unit is provided with bilateral nozzle port, and is suitable for clockwise and […]

VD TYPE
The DELTA VD fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can be fitted to every oil burner. The DELTA fuel unit type VD is designed for pumping oil in high pressure oil burners […]

VM TYPE
The DELTA fuel unit type VM provides an efficient and modern oil burner pump with compact design since its mounting flange, the hub and the shaft of the international standard. (DIN 24220, EN 225) correspond, they can be fitted to every oil burner

EV-F84 TYPE
The Delta type EV electrical solenoid valve is a normally closed one-way direct acting valve. It is designed for use as an interrupter valve or as a shut-off valve. The body is made of brass, the core is of solenoid quality steel and the seal is a synthetic rubber which is suitable for use with light […]

Share this article :

Posted by: rudy wiratama

wiratama Updated at: 07.22


 
Support : Rudy Wiratama | Johnytemplate
Copyright © 2010. Wiratama flow meter and technical part stock - All Rights Reserved
Template Created by. Creating Website Modified by Rudy Wiratama
Proudly powered by Blogger