Sage Flowmeter

SPESIFICATION :

STYLE: Remote Insertion Mass Flow Meter
SENSOR: Two reference grade platinum RTD clad in 316SS sheath
MATERIAL: Wetted metal components: 316SS
POWER: 24VDC Standard (12VDC or 115/230VAC optional)
POWER DISSIPATION: <2 .5="" span="" w="">
ELECTRONICS: Remote-Style Microprocessor based (Hybrid-Digital)
PROBE ENCLOSURE: Junction Box is Explosion Proof, Class I, Div 2, Groups B, C, D (no electronics)
TRANSMITTER ENCLOSURE: Remote mount, NEMA 4 enclosure
DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
TURNDOWN: 100 to 1
RESOLUTION: 1000 to 1
LOW END SENSITIVITY: 5 SFPM
FIELD CALIBRATION CHECK: Yes - Digital system allows raw signal validation (milli-watts)
COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
APPROVALS: CSA C22.2 (24 VDC); ULI604, Class I, Div 2, Groups B, C, D T4 (24VDC);
CE (AC Power or 24VDC)
FIELD RECONFIGURABLE: Sage ADDRESSER required
FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
FLOW REPEATABILITY: 0.2%
RESPONSE TIME: 1 second time constant
GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
GAS PRESSURE: 500 PSIG (If higher pressure needed, contact Sage)
FLOW OUTPUT: 4 to 20 mA for Rate
TOTALIZER: 24VDC pulse for Totalized value
TEMPERATURE OUTPUT: Through Modbus® only
AMBIENT TEMPERATURE: -40°F to 150°F (66°C)
PROBE STYLE / LENGTH: 1/2" OD Probe (3/4" optional) Lengths 6" to 36"
RELAYS: N/A
CABLE LENGTH: 25' Standard (max length 1000')
FLOW CONDITIONING: Captive Flow Conditioners available upon request with meter purchase

TRANSMITTER ENCL DEPTH: DC: 4.35" ; AC: 5.35"
Share this article :

Posted by: rudy wiratama

wiratama Updated at: 02.38


 
Support : Rudy Wiratama | Johnytemplate
Copyright © 2010. Wiratama flow meter and technical part stock - All Rights Reserved
Template Created by. Creating Website Modified by Rudy Wiratama
Proudly powered by Blogger