Ultrasonic Flow Meter jWAVE

Portable Ulrasonic Flow Meter
Ultrasonic Flow Meter jWAVE
Now you can capture accurate and reliable flow readings with your mobile device, with less hassle and in less time—wherever you need a flow or volume measurement.

No wires. No bulky electronics box to lug around. Your ultrasonic sensor hardware installs on the outside of your pipe in a snap—and senses through the pipe wall. Your mobile device displays readings and helps you set up the hardware.
And Bluetooth replaces the wires.
So you’ll get your job done more quickly, every time. What’s the jWAVE?
The jWAVE Flow Meter solution starts with the jWAVE App (downloadable from the app stores) and works on both iOS and Android devices.

The companion jWAVE Sensor is a compact, clamp-on ultrasonic transducer device that wirelessly transmits flow measurements. With a programmable controller, the output signal can be fed direct, with no other conditioning required.

The jWAVE is highly portable. Just bring the rechargeable clamp-on sensor in its lightweight, weatherproof case, along with a tablet or smartphone (iOS or Android). Bluetooth connectivity replaces wires, and the jWAVE App guides you through your application setup.

The convenient Cam Cleat lets you mount the sensor on any pipe in seconds—no cumbersome clamps required. Bi-directional readings are transmitted to your mobile device for display, and your location’s settings are stored in the jWAVE App, ready for reuse.
Now simply release the cleats, then take the compact sensor on to your next location.















Share this article :

Posted by: rudy wiratama

wiratama Updated at: 19.04


 
Support : Rudy Wiratama | Johnytemplate
Copyright © 2010. Wiratama flow meter and technical part stock - All Rights Reserved
Template Created by. Creating Website Modified by Rudy Wiratama
Proudly powered by Blogger