Dual Channel Supply Unit DSU-2422-N(P) - Wiratama Mitra Abadi | Industrial Equipment

Breaking

27.12.20

Dual Channel Supply Unit DSU-2422-N(P)

 

Dual Channel Supply Unit DSU-2422-N(P)

Dual Channel Supply Unit DSU-2422-N(P) | Dinel-Level and Flow Measurement

A power supply unit (or PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies. Some power supplies have a manual switch for selecting input voltage, while others automatically adapt to the mains voltage. Switched Mode Power Supplies, (often abbreviated to SMPS) are considerably more complex than the linear regulated power supplies. The main advantage of this added complexity is that switched-mode operation gives regulated DC supplies that can deliver more power for a given size, cost and weight of power unit.

Features

  • a universal two-channel supply unit with two independent power supplies 24VDC and relay outputs
  • for supplying arbitrary sensors with NPN (DSU-2422-N) or PNP (DSU-2422-P) output or "S" output (DSU-2422-N)
  • protection against short-circuit, current overload and overvoltage on both sections
  • safety requirements according to EN 61010-1
  • LED state indication
  • isolated switching contact outputs
  • mounting into an installation case or distribution cabinet on DIN rail 35 mm

Another Article:

Specification

TypeDSU-2422-N(P)
Nominal supply voltage 230 V / 50 Hz
Allowed supply voltage tolerance ± 10%
Nominal power demand7 VA
Output voltage for sensor supplying 24 V DC
Output voltage tolerance ± 5%
Input switch on current IQ (at UQ = 0 V)10 mA
Max. output current for sensor supplying50 mA
Output short-circuit current 80 mA
Contact rating:
max. current 4 A
max. voltage250 V
max. power500 VA
Max. switching frequency of loaded contact360 / h
Contact life - number of cyclesmin. 105
Isolating voltage mains 230 V - output 24V 4 kV
Ambient temperature -20 to + 50 °C
Protection rating:
enclosureIP 40
terminalsIP 20
Housing materialpolycarbonate
Terminal materialCuBe
Max. / recom. conductor cross-section 4 mm2 / 0,5 ÷ 1 mm2
Weight c.0,4 kg
Připojení k síti 230 V pouze přes vypínač nebo jistič
Internal protection on 230VAC side - fuse T80 mA
The device meets the requirements of the following standards
Electrical safety requirements due to EN 61010-1
EMC EN 55022, EN 61000-4-2,-3,-4,-5,6,-11

Ref: Dinel.cz

Contact us : sales@wmablog.com or visit to our E-Commerce

Download Catalog: Power Supply and Switching Units Dual-channel supply unit DSU-2422-NP Level and Flow Measurement

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :