Aanderaa Doppler Current Sensor (DCS) - Wiratama Mitra Abadi | Industrial Equipment

Breaking

12.1.21

Aanderaa Doppler Current Sensor (DCS)

 

In-line ZPulse Doppler Current Sensor 5800 / 5810 / 5800R / 5800RR / 5810E

The In-line Doppler Current Sensor (DCS) is the first current sensor with the option to directly connect water quality sensors in a robust, integrated package (version 5810). The sensor replaces the successful DCS4100 in-line current sensor using newer technology with extending capabilities. It is designed for easy integration into systems with Aanderaa or third-party dataloggers. Based on a modified version of the ZPulse Doppler Current Sensor 4520, it connects through a combined mooring and signal cable. For buoy application, when the buoy creates magnetic interferences with the internal sensor compass, it is possible to use an external compass solution.




Configuration

Available configuration settings include polled / non-polled mode, ping rate, recording interval, and settings for connected sensors for the 5810.

Working principle

The DCS sensor is based on the backscatter acoustic Doppler principle. It has two orthogonal transducer axes with two transducers on each axis. This enables the sensor to measure in both directions on each axis which is a great advantage. By utilizing only the two transducers that are facing upstream, the sensor is insensitive to disturbance from vortex speeds around the mooring and the sensor itself (forward ping functionality). One transducer on each axis transmits a short ultrasonic pulse simultaneously (one ping), the same transducers receive backscattered signals from particles in the water. This gives an orthogonal x and y speed component which is tilt-compensated to find the correct horizontal speed components.

The North and East speed components are calculated based on the x and y speed components and the heading from the built-in solid-state electronic compass. The sensor takes several of these two-component measurements and finally calculates the averaged north and east speed components and the vector averaged absolute speed and direction.

The two-frequency ZPulse technology provides higher precision data from each ping. This gain can be used either to obtain improved measurement precision or to reduce the average power consumption by halving the number of required pings.

The sensor can be configured using the provided Aanderaa Real-Time Collector software either directly connected to a computer or through SmartGuard or SeaGuard Datalogger. The Real-Time Collector is a powerful and efficient tool for data collection and control of Aanderaa’s oceanographic instruments and sensors.

Data logged by use of the SeaGuard Datalogger can be post-processed using SeaGuard Studio software, while data from SmartGuard can be view and exported by use of the Data Studio software. The Review software package is available for customized visualization of real-time data.

     Another Article:

Features

  • Rugged and reliable sensor with high accuracy
  • Build-in solid-state 3-axis tilt-compensated compass
  • Heading and tilt-compensated for each ping
  • Low power consumption

Applications

  • Ocean / coastal observatories
  • Harbour monitoring systems
  • Data buoys
  • Sensor strings
  • Winch profiling systems

Specifications

Interfaces

  • 5800 / 5810: AiCaP protocol
  • 5800RR: RS-232 8)
  • 5800R: RS-422
  • 5810E: Engineering - Analog, AiCaP, RS-23 or RS-422

Power

  • Supply voltage: 6-14VDC

Environmental

  • Depth rating: 2000m
  • Operating temperature: -5 to +40°C
  • Dimensions: D: 129mm H: 369mm
  • Materials and finish: Durotong, titanium
  • Weight: 5,5 kg

Velocity measurement

  • Current Speed: (Vector averaged)
  • Range: 0–300cm/s
  • Resolution: 0.1mm/s
  • Mean Accuracy: ±0.15cm/s
  • Relative: ± 1% of reading
  • Statistic precision (std): 0.3cm/s (ZPulse mode), 0.45cm/s

Current Direction

  • Range: 0–360° magnetic
  • Resolution: 0.01°
  • Accuracy: ±5° for 0-15° tilt; ±7.5° for 15-35° tilt
  • Tilt Circuitry: Compass Circuitry:
  • Range: 0-35°
  • Resolution: 0.01° Resolution: 0.01°
  • Accuracy: ±1.5° Accuracy: ±3°

Acoustics

  • Frequency: 1.9 to 2.0MHz
  • Power: 25 Watts in 1ms pulses
  • Beam angle (main lobe): 2°

For version 5810 / 5810R: Optional sensors: Temperature Sensor 4060

  • Range: -4-36°C (32-96.8°F)
  • Resolution: 0.001°C (0.0018°F)
  • Accuracy: ±0.03°C (0.054°F)
  • Response Time 63%: < 2 seconds

Conductivity Sensor 4319

  • Range: 0-7.5 S/m
  • Resolution: 0.0002 S/m
  • Accuracy 4319 A: ±0.005 S/m - 4319
  • B: ±0.0018 S/m
  • Response Time: < 3s
  • Temperature
    Range: -5–40°C (23-104˚F)
    Resolution: 0.01°C (0.018°F)
    Accuracy: ±0.1°C (0.18°F)
    Response Time (63%): <10 sec

Wave and Tide Sensor 5217/5218 Tide:

  • Several ranges available, wave max: 1000kPa (145psia)
  • Resolution: <0,0001% FSO
  • Accuracy: ±0.02% FSO, ±0.01%
  • FSO on request
  • Wave
    Sampling rate: 2Hz, 4Hz,
    No. of samples: 256, 512, 1024, 2048

Pressure Sensor 4117, several ranges available

  • Resolution: <0.0001% FSO
  • Accuracy: ±0.02% FSO, ±0.01%, FSO on request
  • Temperature:
  • Range: 0 – 36°C (32 – 96.8˚F)
  • Resolution: <0.001°C (0.0018°F),
  • Accuracy: ±0.1°C (0.18°F), Response Time (63%): <10 sec

Oxygen Optode 4835/4330

  • Range: 0 – 500 µM (O2-Concentration), 0 - 150% (Air Saturation)
  • Resolution: < 1 µM (O2-Concentration), 0.4 % (Air Saturation)
  • Accuracy: <8 µ M or 5% (whichever is greater), <5% (Air Saturation)
  • With multipoint calibration: <±2 µM or ±1.5%
  • Temperature
    Range: -5 to +40°C (23 - 104˚F),
    Resolution: 0.01°C (0.018°F)
    Accuracy: ±0.03°C (0.18°F),
    Response Time (63%): <2sec

Download Datasheet: Aanderaa Doppler Current Sensor (DCS)

Reference: aanderaa.com

Contact us : sales@wmablog.com or visit to our E-Commerce

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :