Matsushima - Belt Sway Switch - Wiratama Mitra Abadi | Industrial Equipment

Breaking

12.1.21

Matsushima - Belt Sway Switch

 



Misalignment Belt Detection

The Belt Sway Switch functions in two ways; detecting a deviation or sway in the conveyor belt and providing an alarm and sending out the signal to stop the conveyor.

The use of the switch in the material transport system can prevent damage to the conveyor belt and/or drive system and avoid consequential confusion on transport lines in the event of an accident.

Features

  • Weatherproof Type IP67
  • The Belt Sway Switch is constructed with high-reliability microswitches lubricate fewer ball bearings, a touch pulley which is tilted to 75º and other parts; its functions are designed with a large margin for sure action and long life.
  • The switch has the difference of 2º between ON and OFF to switch certainly at an action point. Therefore, this switch can prevent belt conveyor troubles by simples circuit.

Model

  • ELAP 20 Standart Verison Without EX-Proof
  • ELADP 22 SDP13 For Dust Ignition-Proof
  • ELAM 10 d2G4 With Flame-Proof

Spesifikasi

An inclination angle of touch pulleyMAX 75ºLead OutletStandard (Non-Ex-Proof)G 1/2
Operation torque of touch pulley3.4∼5.4Nm (0.35∼0.55kgfm)Flameproof type. Dust ignition-proof typeG3/4
Contacts2CEnclosureIP 67
Capacity of Contact

15A- 125, 50VAC

1/2A- 125 VDC

Coating ColorMunsell 7.5GY6/10

Dimension




 

Visit Wmablog for more info

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :