Bamo Hydrostatic Level Transmitter, PVDF BAMONIV

Hydrostatic Level Transmitter, PVDF BAMONIV  Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.  Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.  Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.  Hydrostatic Level Transmitter, PVDF BAMONIV  BAMONIV is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement. The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to the immersion depth. To be mounted at the bottom of a non-pressurized tank, the BAMONIV comes with a connector or a PVC cable.  Features Level measurement of aggressive fluids Measuring cell: ceramic (96 %) Accuracy: 0.35 % F.S. Ranges from 0 ... 0.6 m up to 0 ...10 m WC Fitting 1 ½" in PVDF Application Diesel, lubricating oils Viscous, pasty liquids Corrosive, acidic or basic liquids  Another Article:  Hengesbach Level Module for Installation in Level Probes Tyoe NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor Specification Measuring ranges	0... 0.6 /... / 0 ... 10 m WC Long term stability	≤ ± 0,1 % FS / year Accuracy	≤ 0.35 % FS Measuring cell	Ceramic AI₂O₃ 96 % Fitting material	PVDF Fitting type	BSP 1 ½" - DIN 3852 Seal	FPM Connection	Or through a connector ISO 4400, or cable output (2  	m long) Power supply	9...32VDC Output signal	4...20 mA ; 2-wire Load	At 20 mA, Rmax. = (Vs - Vs min.) / 0.02 Electrical protections	Reverse polarity, overload, short circuit Emissions & interferences	In conformity with EN 61326 Response time	≤ 0.7 s Overpressure	Less than 8 times the FS Liquid temperature	-40 ...+125 °C Temperature compensation	-20 ... + 80 °C Temperature incidence	±0.1%FS/10K Ambient temperature	-40 ... + 85 °C (without connector or cable) Storage temperature	-40 ...+100 °C (without connector or cable) Mass	0.2 kg  Download Data Sheet: Hydrostatic Level Transmitter, PVDF BAMONIV  Ref: bamo.eu


Hydrostatic Level Transmitter, PVDF BAMONIV

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Hydrostatic Level Transmitter, PVDF BAMONIV

BAMONIV is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement. The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to the immersion depth. To be mounted at the bottom of a non-pressurized tank, the BAMONIV comes with a connector or a PVC cable.

Features

  • Level measurement of aggressive fluids
  • Measuring cell: ceramic (96 %)
  • Accuracy: 0.35 % F.S.
  • Ranges from 0 ... 0.6 m up to 0 ...10 m WC
  • Fitting 1 ½" in PVDF

Application

  • Diesel, lubricating oils
  • Viscous, pasty liquids
  • Corrosive, acidic or basic liquids

Another Article:

Specification

Measuring ranges0... 0.6 /... / 0 ... 10 m WC
Long term stability≤ ± 0,1 % FS / year
Accuracy≤ 0.35 % FS
Measuring cellCeramic AI₂O₃ 96 %
Fitting materialPVDF
Fitting typeBSP 1 ½" - DIN 3852
SealFPM
ConnectionOr through a connector ISO 4400, or cable output (2
 m long)
Power supply9...32VDC
Output signal4...20 mA ; 2-wire
LoadAt 20 mA, Rmax. = (Vs - Vs min.) / 0.02
Electrical protectionsReverse polarity, overload, short circuit
Emissions & interferencesIn conformity with EN 61326
Response time≤ 0.7 s
OverpressureLess than 8 times the FS
Liquid temperature-40 ...+125 °C
Temperature compensation-20 ... + 80 °C
Temperature incidence±0.1%FS/10K
Ambient temperature-40 ... + 85 °C (without connector or cable)
Storage temperature-40 ...+100 °C (without connector or cable)
Mass0.2 kg

Download Data Sheet: Hydrostatic Level Transmitter, PVDF BAMONIV

Ref: bamo.eu

Berbagi:  

Komentar

Articles