Bamo Level Indicators and Controllers CF80 Series

 Bamo Level Indicators and Controllers CF80 Series

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Level Indicators and Controllers CF80 Series | Descriptions

Under the thrust of the fluid, the float transmits the level through a rod transmission to a vertical stem. The stem actuates a pointer on the dial, the contacts, or/ and a potentiometer for output resistive signal image of the level. Gauge is mounted on the top of the tank.

The instrument is available in various versions according to requirements:

• Direct reading of level on top or/ and side of gauge head.
• 1 to 3 contacts (2-way contact), high and low levels, and/ or pump automation
• Output for continuous resistive signal

The complete system is supplied ready to install and to use.

Models JE80, CF80, and JLD are designed for tanks with a height of 150 to 500 mm. Model JE80N is designed for tanks with a height of 150 to 650 mm.

Features

• Height from 150 to 650 mm
• Fitting: BSP 2'', male
• Head housing: IP54
• 3 possible functions:
  • Direct reading on dial
  • With 1 to 3 contacts, potential free
  • Output signal: continuous resistive signal (Ω)

Application

These controllers for alarms on low, high levels, and transmitters of continuous level, are designed for indoor and small tanks.

• Diesel in tanks
• Day-tanks
• Lubricating oil
• Glycol water
• Rainwater

Particularly suited for small storage tanks (150 to 650 mm high), e.g. on filling automation of tanks for diesel generators.

Another Article: Hengesbach Level Module for Installation in Level Probes Tyoe NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor

Specification

Materials	Steel, Nylon, brass, stainless steel
	Float: foamed PVC
	Flange seal: Cork gasket
Fitting	BSP 2'', male
Head housing	IP 54
Dial	Above: Orange background; Graduations at 0, 1/2 and
	1 (fig1.)
	Side: White background; Graduations at 0, 1/2 and 1
	(fig.2)
Operating pressure	Atmospheric
Operating temperature	From 0 to 40 °C
Contacts	Default setting:
	Low level alarm: 20 % capacity (Change-over contact, 10 A, 230 V, potential free)
	High level alarm: 85 % capacity (Change-over contact, 10 A, 230 V, potential free)
	Filling function: ON at 40 % and OFF at 80 % capacity (2-way contact, 10 A, 230 V, potential free)
	On request: Factory setting between 20 and 85 % capacity.
Output, resistive signal	From 0 to 160 Ω (approx., ±15 %)

Ref: bamo.eu

Contact us : sales@wmablog.com or visit to our E-Commerce

Download Data Sheet: Level Indicators and Controllers CF80 Series