Wenglor Retro K1R87PCT2 -Reflex Sensor for Clear Glass Recognation

A reflector must be used in combination with these sensors. wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation and can be easily protected as well. Time delay can be activated by RS-232 interface.

Feature

• Dynamic readjustment of the switching threshold
• Recognition of clear glass
• Simple installation
• Teach-in, external teach-in

Another Article: The Technology of Ultrasonic Flowmeter Working Principle of Flow Meter How to Choose a Flow Meter Models and Types of Flow Meter Sound Velocity of Material Principle Working of Coriolis Mass Flow Meter

Specification

Optical Data

Working Range	4000 mm
Reference Reflector/Reflector Foil	RQ100BA
Clear Glass Recognition	yes
Switching Hysteresis	< 5 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100000 h
Max. Ambient Light	10000 Lux
Opening Angle	5°
Single-Lens Optic	Yes

Electrical Data

Supply Voltage	10...30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	1700 Hz
Response Time	250 µs
On-/Off-Delay (RS-232)	0...5 s
Temperature Drift	< 5 %
Temperature Range	-10...50 °C
Switching Output Voltage Drop	< 2,5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Lockable	yes
Teach Mode	MT
Protection Class	III

Mechanical Data

Setting Method	Teach-In
Housing Material	Plastic
Full Encapsulation	yes
Degree of Protection	IP67
Connection	M12 × 1; 4-pin

Output

PNP NO/NC switchable	yes
RS-232 with Adapterbox	yes

Datasheet: Wenglor K1R87PCT2 Reflex Sensor

For more info and price please contact sales@wmablog.com

Reference: wenglor.com