Bamo Level 1 Channel Alarm Unit MAXIMAT TC1

Bamo Level 1 Channel Alarm Unit MAXIMAT TC1

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Level 1 Channel Alarm Unit MAXIMAT TC1 | Descriptions

MAXIMAT TC1 is a signaling unit for overfill and leakage detectors MAXIMAT (X series) and MAXITOP. The detector is powered directly by TC1 unit. The built-in buzzer provides local alarm to the operator, and the LEDs inform visually about the alarm status. The audible alarm is acknowledged through the push-button on the right side.

Features

• Alarm unit, 1 channel, for: MAXIMAT CX & and MAXITOP series, overfill and leak detectors
• Optical and acoustic alarms (> 75 dB)
• Diagnostic of detection loop
• Relay output, changeover contact
• Robust and inexpensive

Application

Alarm signaling device for

• Containers for storage of liquids, in safe area
• Retention basins, piping
• Tanks and collecting basins

Another Article: Hengesbach Level Module for Installation in Level Probes Tyoe NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor

Specification

Power supply	230 V AC ±10 %; 50/60 Hz; 24 V DC
Consumption	About 2 VA / 2 W
Protection	IP 65 according EN 60 529
Temperature	-20 ... +60 °C
Connections	Screw terminals
Indications	Green LED for "operating system"
	Red LED for ''alarm in progress''
	Yellow LED for "alarm not yet acknowledged"
	Integrated audible alarm; can be disabled
Output relay	Max. 230 V AC / 3 A; potential free changeover contact
Housing	Polycarbonate, 120x80x55 mm; for wall mounting

Ref: bamo.eu

Contact us : sales@wmablog.com or visit to our E-Commerce

Download Data Sheet: Level 1 Channel Alarm Unit MAXIMAT TC1