Bamo Level On-Floor Leak Detector MAXIMAT LWC BX

 Bamo Level On-Floor Leak Detector MAXIMAT LWC BX

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Level On-Floor Leak Detector MAXIMAT LWC BX | Descriptions

MAXIMAT LWC BX compact leak detectors are used to detect leakage or spread water-polluting liquids. Due to the short detection height of the liquid, about 1mm, even a small leakage quantity is reliably detected. The device is used for leakage detection of water-polluting media.

Features

• All-plastic versions
• Integrated transmitter and connection for the test button
• No moving parts
• Floor leak detection
• NPN / PNP interfaces

Application

Leak detection in accordance with the German Water Resources Act (WHG) for retention basins and floors where are in use water-polluting, electrically conductive, non-flammable liquids.

Specification

Detection	Capacitive high-frequency sensor, fail-safe detector
Ambient temperature	-20 ... +60 °C
Operating pressure	Atmospheric; Limits: 0.8 to 1.1 bar
Housing head	PBT, fiber-glass reinforced
Protection	IP67 (not suitable for permanent immersion)
Power supply	15 ... 27 V DC
Consumption	< 1 W
Cable	PVC, 6 m long; 5x 0.34 mm²
Outputs	Potential-free Reed contact for low voltage (Normally
	closed, it opens when alarm occurs)
	Rated: Max. 50 V AC / DC, Max. 0.5 A, Max. 10 VA,
	convenient for operating with a coupling relay or PLC,
	signaling device TC4 / TC1 or CST unit.
	2-wire alarm output reporting
	with transmitter MAXIMAT SHR C
Note: Simultaneous use of both outputs is not possible.
Additional function	Connection of an external test button (potential-free
	contact), for a complete diagnostic of the device integrity
	(connection loops, electronics).
Connection options	Alarm units: MAXIMAT TC1 / TC4
	Coupling relay: CST
	Transmitter: MAXIMAT SHR C
	Automation with PLC

Ref: bamo.eu

Download Data Sheet: Level On-Floor Leak Detector MAXIMAT LWC BX
Another Article: 

Hengesbach Level Module for Installation in Level Probes Tyoe NM
Takuwa Water Level Gauge Sensor
Mac3 Float Level Switch
Hengesbach Level Module NC1 Series
Mechatronics Dizzi Fluid Level Sensor