Dwyer Series P8 Piston High Pressure Brass Flow Switch

Flow includes Flow Transmitters, Flow Sensors, Flowmeters, Sight Flow Indicators and Water Meters. Mass Flowmeters, Controllers, Flow Indicators and Controllers are ideal for measurement of flow rates. Flow Switches come as paddle, thermal, piezo, and shuttle/piston. Flow Switch Sensors with an electrical contact output at a specific flow rate have different types of switches, which are paddle, thermal, piezo, and shuttle/piston.

Shuttle or piston flow switches are sensors with an electrical contact output at a specific flow rate. Models are used with oil, air, water and gases. Applications include oil flow control, low flow detection in cooling lines, and high pressure lubrication systems. Rugged construction and excellent chemical compatibility simplify flow/no flow detection. The Series P8 High Pressure Brass Flow Switches are ideal for high in-line pressures. Set points range from 0.25 to 2.0 GPM for liquid flow.

Features

• Integrates a one-piece magnetic PPS composite piston to handle pressure up to 1500 psi
• Less susceptible to clogging than other high in-line pressure switches with 100 micron filtration

Application

• Industrial cleaning equipment
• High pressure lubrication systems
  

Specification

Service	Compatible liquids.
Wetted Materials	Housing: Brass; Piston: PPS composite, epoxy; Spring: 316 SS; O-ring: Flourocarbon.
Temperature Limits	-20 to 275°F (-28 to 135°C).
Pressure Limits	1500 psi (103.4 bar).
Accuracy	±20% of set point.
Switch Type	SPST, NO.
Electrical Rating	17 A @ 120 VAC, .08 A @ 240 VAC, .13 A @ 120 VDC, .06 A @ 240 VDC.
Electrical Connection	No. 22 AWG, 24" (61 cm) polymeric leads.
Process Connections	3/8" male NPT.
Mounting Orientation	Any position. Set points shown are based on vertical, inlet down position.
Required Filtration	100 microns or better.
Weight	6 oz (.17 kg).
Agency Approval	CE.

Download Data Sheet: Series P8 Piston High Pressure Brass Flow Switch

Ref: dwyer-inst.com