Kobold PSR and PSE Paddle Switch

 The KOBOLD flow monitor types PSE and PSR are simple, reasonably-priced and reliable monitors of fluid motions. Depending on the flow velocity/flow throughput, the baffle plate is deflected and it moves over the balance arm the permanent magnet into the operating range of the reed contact mounted outside the process fluid.

The leaf spring, which also serves as a support for the balance arm, forces the baffle plate back to its rest position when there is no flow. KOBOLD baffle plate flow monitors are supplied completely assembled with pipe length up to nominal size 40.

For bigger nominal pipe sizes the devices are supplied without pipe length for direct fitting and are screwed into standard T pieces or reducing pipes. PTFE tape is used
for sealing.

PSR and PSE versions

• PSR made of brass or stainless steel with fitting and female thread for nominal sizes G ¼ to G 1½.
• PSE made of brass or stainless steel with external thread for larger nominal sizes NW 50...NW 200.

 

Another Article: Pulsarpoint 310 Pulsar Rotating Paddle Switch Blackbox 130 Pulsar Level Measurement Hydrastep 2468 System Delta Mobrey Boiler Water Level Control Delta Mobrey Takuwa Groundwater Aeration Sound Measuring Device GAS-03

Features

Applications

• Cooling and lubricant circuits
• Dry running protection for pumps
• Prevention of low water levels
• Monitoring of pipe fracture

Special advantages

• Pressure-resistant, forged case for model PSR-xx08...PSR-xx25
• Baffle plate system made of spring stainless steel This precludes bending of paddle even with flow
• rates well outside the switching range
• Baffle plate exchangeable

Specifications

Technical Details

• Tolerance: ±15 %
• Medium temperature:
  -20...+70°C (NBR-seal)
  -10...+110°C (FPM-seal)
• Ambient temperature: -20...+50°C

Max. Pressure	Brass Version	Stainless steel Version
PSE PSR-¼...1	100 bar	250 bar
PSR-1¼, 1½	25 bar	40 bar

• Protection type: IP65
• Preferred mounting position: Upright, horizontal
• PSE-1x52/PSE 1x14: only upright
• Inlet /outlet: 5xDN in each case

ATEX and IECEx
R, U N/O/N/C contact and changeover contact
max. 2 A, max. 60 VAC/DC, max. 40 W, 20 VA
Ex-range:

• I M1 Ex ia I Ma
• II 1G Ex ia IIC T4/T3 Ga

IECEx I
I 1D Ex ia IIIC IP6x
T110°C/150°C Da
-20°C ≤ Ta ≤ 50°C

Download Datasheet: Kobold PSR and PSE Paddle Switch

References : kobold.com