Proximity Sensor Omron E2CY-SD Non-Ferrous-Metal-Detecting - Wiratama Mitra Abadi | Industrial Equipment

Breaking

25.12.20

Proximity Sensor Omron E2CY-SD Non-Ferrous-Metal-Detecting

 Proximity Sensor Omron E2CY-SD Non-Ferrous-Metal-Detecting | (Separate Amplifier Type)

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Proximity Sensor Omron E2CY-SD Non-Ferrous-Metal-Detecting

Features

  • Detects aluminum, copper, and other non-ferrous metals.
  • The product lineup includes a compact, flat Sensor Head (E2CY-V3A) and a model with fluororesin (E2CY-C2AF) for resistance to
  • Simple teaching function to easily adjust
  • Check detection status at a glance with numeric values on a digital

Rating and Specifications

Sensor

Model

Item

E2CY-X1R5A E2CY-C1R5A-1E2CY-C2A(F)E2CY-V3A
Stable sensing distance0 to 1.5 mm0 to 2 mm0 to 3 mm

 

Differential travel

10% max. of sensing distance with Amplifier Unit in FINE mode

15% max. of sensing distance with Amplifier Unit in NORM mode

Detectable objectNon-ferrous metal
Standard sensing objectAluminum: 8 ´ 8 ´ 1 mm

Aluminum:

12 ´ 12 ´ 1 mm

Response frequency *140 Hz min. with Amplifier Unit in FINE mode 100 Hz min. with Amplifier Unit in NORM mode
Ambient temperature rangeOperating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity rangeOperating and Storage: 35% to 95% (with no condensation)

 

 

 

Temperature influence *2

 

-10 to 55°C

±15% max. of sensing distance at 23°C

 

 

±10% max. of sensing distance at 23°C

±15% max. of sensing distance at 23°C

 

0 to 40°C

±10% max. of sensing distance at 23°C *3±10% max. of sensing distance at 23°C

 

Vibration resistance

Destruction: 10 to 500 Hz, 2-mm double am- plitude or 150 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistanceDestruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protectionIEC 60529 IP67
Connection methodPre-wired Models (High-frequency coaxial cable, Standard cable length: 3 m)
Cable length compensation0.5 to 5 m *4
Weight (packed state)Approx. 35 g

 

 

 

 

Materials

CaseStainless steelZinc die-cast
Sensing surfaceHeat-resistant ABS (E2CY-C2AF: Fluororesin)
CableSoft PVC (E2CY-C2AF: Fluororesin)
Clamping nutNickel-plated brass (E2CY-X1R5A only)
Toothed washerZinc-plated iron (E2CY-X1R5A only)
Mounting screwsZinc-plated iron (E2CY-V3A only)

Amplifier Units

Item                 ModelE2CY-SD11
Power supply voltage12 to 24 VDC ±10%, ripple: 10% max.
Power consumption1,080 mW max. (45 mA max. at 24 VDC)
Sensing distance adjustment range10% min. of stable sensing distance
Sensitivity settingTeaching / manual adjustment
Control outputNPN open collector (26.4 VDC max.), load cur- rent:100 mA max., residual voltage: 1 V max.

 

 

 

 

 

Functions

OFF-delay timer0 to 40 ms (1 to 20 ms: 1-ms increments, 20 to 40 ms: 5-ms increments)
Zero resetSupported.
Intial resetSupported. (All settings are returned to their default values.)
Hysteresis setting3 to variable
Self diagnosisDisplays errors (sensor disconnection, sen- sor short-circuit, or output short-circuit)
Operation modeChanged with NO/NC switch.
Protection circuitsPower supply reverse polarity protection and output short-circuit protection
IndicatorOperation indicator (orange)
Digital display *1Detection amount display (FINE: 4,000 max., NORM: 2,000 max.), bar display, function display (red)
Reverse displaySupported.
Ambient temperature rangeOperating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity rangeOperating and storage: 35% to 85% (with no condensation)
Temperature influ- ence *2±10% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence±1% max. of sensing distance in the rated voltage range ±10%
Insulation resistance20 MÙ min. (at 500 VDC) between current- carrying parts and case
Dielectric strength1,000 VAC, 50/60 Hz for 1 minute. between current-carrying parts and case

 

Vibration resistance

Destruction: 10 to 150 Hz, 1.5-mm double amplitude or 100 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistanceDestruction: 300 m/s2 3 times each in X, Y, and Z directions
Degree of protectionIEC 60529 IP50 (with Sensor cable con- nected and protective cover attached)
Connection methodPre-wired Model (Standard cable length: 2 m)
Weight (packed state)Approx. 100 g

 

 

Materials

CasePBT
CoverPolycarbonate
Cable connecting screws

 

Zinc-plated iron

AccessoriesE39-L143 Mounting Bracket (SUS304 stainless steel), instruction manual

Download Catalog: Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type) E2CY-SD

Ref: Omron.co.id or More Article

Contact us : sales@wmablog.com or visit to our E-Commerce

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :