CalFlo™ CFAM Flocorp

CalFlo™ CFAM Flocorp

Flow measurement provides a variety of application-specific challenges because each has individual measurement requirements, restrictions, piping considerations, etc. FLO-CORP’s experienced team is second-to-none when providing expert flow advice on the correct meters for your application. Our team will help you navigate through the selection process if you are not sure which meter to use. Technologies offered include variable area, positive displacement, ultrasonic, magnetic, mass, and open channel flow meters.

CalFlo™ CFAM Flocorp | Thermal Mass Air Flow Meter

Accurate measurement in air conditioning, dust collection, ventilation, energy consumption, potable/non-potable water, acid, oil, gas, and other applications can be accomplished by CalFlo calorimetric flow meters. These meters are easy to install and their high-quality construction will withstand industrial use.

Ideal for small pipe and low flow applications, the CalFlo™ CFAM is an inline thermal mass air flow meter that will accurately measure and control a variety of gaseous media. Completely encapsulated in epoxy resin, CFAM features solid-state sensing, adjustable measuring range, LED output display, and is well-suited for small pipes up to 3/4” in diameter. Typical applications include vent gas, wet stack gas, sample line flow, purge flow, nitrogen blanket flow, and many others. Select the appropriate configurations based on your application or contact our Application Specialist for additional assistance.

Features and Benefits

  • Compact, Rugged Industrial Design
  • Ideal for Small Pipe and Low Flow Applications
  • High-Accuracy with NO Moving Parts
  • Provides 4-20 mA Measurement
  • Features LED Output Display
  • Temperature Compensated


Sensor Mechanical 
ServiceCompatible GassesInline Sensor Pipe Material


Stainless Steel




Measuring Range

CFAM-00: 0.25 to 16 fps (5 mps)

CFAM-01: 0.25 to 32 fps (10 mps)

CFAM-02: 0.25 to 65 fps (20 mps)

CFAM-03: 0.25 to 98 fps (30 mps)

Sensor MaterialCeramic, platinum with overglaze 


Enclosure Material



Measuring Range AdjustmentContinually adjustable from 20% to 100%  of the special measuring range, 2 potentiometers (zero point range) 
Connection Size1/4”, 1/2”, 3/4” 


Connection Type

Male NPT (Std.);

Special Connection (Optional)

Accuracy< 3% 
Repeatability< 1%Electrical 
Temperature Drift< 0.3% / KSupply Voltage24 VDC ±15% 
Process TemperatureF: -4º to 158º C: -20º to 70ºConsumptionApprox. 800 mW to 1.3 W (at max. flow) 
Ambient TemperatureF: -4º to 158º C: -20º to 70ºOutput Current4-20 mA 
Loop Resistance0-600 ohm 
Pressure140 psi (10 bar) 
Protection RatingNEMA 4 (IP65) 
Cable Jacket Material



 Cable Length6.5 ft, 3-conductor 18 AWG 


Contact us : or visit our E-Commerce

Download Datasheet: CalFlo™ CFAM Thermal Mass Air Flow Meter