Flux Drum Pump with Mechanical Seal F 430 / FP 430

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

Features:

• With mechanical seal for sealing the inner tube
• Pump can be disassembled into two parts: inner tube cpl. and outer tube
• Inner tube with metal core on PP and PVDF
• Versions for use in hazardous areas available
• FOOD version available
• Grease-lubricated shaft bearing
• Can be combined with various motors as required

Advantages:

• Ideal for frequent medium changes, hardening media, fast drying media, crystallizing media
• Can be taken apart into main components easily and quickly for cleaning
• Compared to sealless pump higher service life on abrasive media
• The inner tube reinforced with metal core on plastic models prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges.
• High stability of the pumps in plastic version enables immersion lengths of up to 3000 mm even here
• Temporary operation against closed valve (hand nozzle, ball valve etc.) is possible until max. indicated operating temperature
• Very quiet operation with low vibrations
• Version in stainless steel and Hastelloy C can be used in hazardous areas
• FOOD version conform EC 1935/2004 and FDA CFR 21 for contact with food available

Application:

Outer tube material polypropylene:

Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water

Outer tube material polyvinylidene fluoride:

Hydrobromic acid, chloric acid, chromic acid, hydrofluoric acid, battery acid, nitric acid, nitrous acid, sulfuric acid, acetic acid (up to 80 %), methyl sulfuric, perchloric acid, peracetic acid, phosphoric acid, potassium (potash bleaching lye), sodium hypochlorite, sodium chloride (table salt), potassium chloride, sodium sulfate, sodium carbonate

Outer tube material aluminium:

Petroleum, diesel, heating oil, hydraulic oil, engine oil, machine oil

Outer tube material Hastelloy C:

Gasoline, formic acid (as from 85 %), ethylene glycol, petroleum, "MEK (methyl ethyl ketone = butanone), octane

Outer tube material stainless steel:

Ethanol, methanol, butanol, acetone, toluene, isobutanol, propanol, xylene, urea solutions, white spirit, diesel

Another Article: Flux Air-Operated Diaphragm Pumps FDMH 25 Flux Eccentric Worm - Drive Pumps Flux Eccentric Worm - Drive Pumps F 550 S Flux Eccentric Worm - Drive Pumps F 560 GS Flux Drum Pumps, Barrel Pumps and Container Pumps

Specification:

• Flow rate: max. 240 l/min¹
• Delivery head: max. 30 mwc²
• Viscosity: min. 1 mPas - max. 1200 mPas²
• Outer tube diameter: min. 40 mm - max. 50 mm³
• Immersion length: 700, 1000, 1200
• Materials outer tube: Polypropylene, Aluminium, Stainless steel, hastelloy C, Polyvinylidene fluoride
• Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels, Aqueous salt solutions
• Seal: with mechanical seal
• Container: 200 l drums, 1000 l IBC, Tanks > 1000 liters

Download Data Sheet: Drum pump with mechanical seal F 430 / FP 430

Ref: flux-pumps.com