Plugs & Jacks T-Series SwitchPlug, Connector-Amphenol

The Amphenol T series SwitchPlug uses a unique 360-degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to the ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing an excessive build-up of oxidization and contamination. Activation is directly off the jack's full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms.

Another Article: signet 2540 stainless steel high-performance paddlewheel flow sensor Kobold DRG Rotating Vane Flowmeters Hengesbach Temperature Measurement Thermax 6 Level Mini Strips Irreversible Labels Thermostrip DS  - Thermax

Specifications:

			VALUE
			Straight	Right Angle	Jumbo
GENERAL CHARACTERISTICS	Number of Contacts		3 Pole Tip Ring Sleeve (Stereo)
	Termination		Solder
	Max. Wire Gauge - Stranded Wire		3 Pole (Stereo): AWG 18˜1mm
	Flammability rating of insulating plastics		UL94V-0
	Solderability complies with		IEC 68-2-20
	Environmental		Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL CHARACTERISTICS	Current Carrying Capacity		10A (Depends on Mating Connector and Cable)
	Typical Contact Resistance		Depends on Mating Connector
	Insulation Resistance (initial)		>2GΩ
	After Damp Heat Test		≥1GΩ
	Dielectric Withstand Voltage		2 Pole : 1.5 kV dc3 Pole : 1 kV dc
CLIMATIC CHARACTERISTICS	Protection Class		IP40
	Operating Temperature		-25°C to +75°C (-13°F to + 167°F)
MECHANICAL CHARACTERISTICS	Insertion and Withdrawal Force		≥10N - ≤30N
	Weight1	Thermoplastic Backshell	28g (0.061lb)
		Metal Backshell	35g (0.077lb)
	Typical Cable Retention Force		22kg to 44kg (50lb to 100lb) - Dependent on cable material and diameter.
		Standard Jaw (T-Series)	3mm to 6mm (0.118” to 0.236”)	3mm to 5.5mm (0.118” to 0.216”)	N/A
		Large Jaw (T-Series)	6mm to 7mm (0.236” to 0.275”)	5.5mm to 6.5mm (0.216” to 0.255”)	N/A
	Cable O.D.	Standard Clamp (Q-Series)	3.5mm to 7mm (0.137” to 0.275”)	N/A	N/A
		Jumbo	NA	NA	7.5mm to 10.5mm (0.295” to 0.413”)
	Mechanical Operations		Diecast Zinc Alloy EZDA No.3
MATERIALS	Connector Shell Material		Satin Nickel or Black Polyester
	Shell Finish		UL94 V-0 PBT Resin or Modified PPE Resin - Black
	Insulators		UL94 V-0 PBT Resin or Modified PPE Resin - Black or Metal CuZn39Pb3
	Boot / Backshell		UL94 V-0 PBT Resin or Modified PPE Resin - Black or Metal CuZn39Pb3
	Cable Clamp		Santoprene
	Cable Bushing		Brass /Ni or Au over 2µm Ni
	Contacts / Plating		Brass /Ni or Au over 2μm Ni

Download Catalog: Amphenol Connector Catalog

Ref: Amphenol.com