Seametrics Electromagnetic Flow Meter PE Series

SEAMETRICS FLOWMETER - PE SERIES - ELECTROMAGNETIC FLOWMETER

.
.Electromagnetic Flow Meter PE Series - Seametrics
The Seametrics PE102 magmeter is designed for low-fow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic.With no moving parts, the PE102 can handle fuids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts (100% PVDF body and PVDF carbon fber-flled electrodes), the meter is corrosion-resistant and compatible with a wide range of chemicals. Accuracy is maintained with conductive fuids (>20 microSiemens) of varying viscosity and densities.
  • No moving parts
  • Requires no straight pipe
  • Pulse and/or 4-20 mA output
  • Chemical and corrosion resistant
  • Insensitive to fluid density and fluid viscosity changes
  • Standard pulse and 4-20mA outputs

The PE meter is compact enough to ft most pump/injection systems. With zero straight pipe required after an elbow, it can be easily mounted in tight spaces. The mounting bracket adds stability.
The PE meter has optocoupled current sinking or current sourcing pulse output that can be connected to the Seametrics FT420 rate/total display or FT520 batch processor, as well as a 4-20 mA loop for powering analog devices. Outputs and power are provided through a cable with 8-pin female circular connector. Order the required cable/connector separately from Seametrics (see How to Order, back page) or from another vendor (one possibility is www.turck-usa.com, part #RKC
8T-6/S618).

Berbagi:  

Komentar

Articles