Matsushima - Belt Sway Switch

Misalignment Belt Detection



The Belt Sway Switch functions in two ways; detecting  an deviation or sway in the conveyor belt and providing an alarm and sending out signal to stop the conveyor.
Use of the switch in material transport system can prevent damage to the conveyor belt and / or drive system and avoid consequential confusion on transport lines in the event of an accident.

Features

  • Weatherproof Type IP67
  • The Belt Sway Switch in constructed with high reliability microswitches, lubricateless ball bearings, a touch pulley which is tilted to 75º and other part; its functions are designed with a large margin for sure action and long life.
  • The switch has the difference of 2º between ON and OFF to switch certanly at an action point. Therefore, this switch can prevent belt conveyor troubles by  simples circuit.

Model

  • ELAP 20 Standart Verison Without EX-Proof
  • ELADP 22 SDP13 For Dust Ignition-Proof
  • ELAM 10 d2G4 With Flame-Proof

Spesifikasi

Inclination angle of touch pulleyMAX 75ºLead OutletStandard (Non-Ex-Proof)G 1/2
Operation torque of touch pulley3.4∼5.4Nm (0.35∼0.55kgfm)Flameproof type. Dust ignition-proof typeG3/4
Contacts2CEnclosureIP 67
Capacity of Contact15A- 125, 250VAC
1/2A- 125 VDC
Coating ColorMunsell 7.5GY6/10
Berbagi:  

Komentar

Articles