APG Recalibratable Incoloy Hammer Union Pressure Transmitter HU1502I

The Hammer Union 1502 Fitting Recalibratable Incoloy Pressure Transmitter is designed for the rugged environments of land-based and offshore drilling installations, including Mud Logging and Measurement While Drilling. The incoloy wetted material is NACE compliant and suitable for sour gases. And the recalibration port allows for digital zero and span setting. With all that, and Class I, Div 1 Intrinsically Safe certification, the HU1502I delivers accurate measurements in the most adverse conditions. Intrinsically safe, sour gas compatible, and recalibratable. The toughness you need in a Hammer Union Pressure Transducer, now with a recalibration port.

Certified & Ready

The HU1502I is certified for global use in hazardous locations through CSA (Class 1, Div 1/Zone 0), ATEX (CE 0344 EX II1G Ex ia IIB T4 Ga), and IECEx (EX ia IIB T4 Ga). It's also NACE MR-01-75 and ISO 15156-3 compliant for sour gasses.

Recalibration

You can recalibrate the transmitter via the recalibration port, with a PC and APG's recalibration software.

Smart(er) Design

Thanks to your feedback, we continue to improve on our customer-centric design. We've removed screws to withstand vibration better, without compromising the toughness and performance you depend on.

Features

• Ranges to 20,000 psi
• 4-20 mA or 0-5 VDC output
• WECO® 1502 fitting for 2” line
• ±0.25% accuracy of full scale
• Exceptional shock and vibration resistance
• Digital recalibration port
• CSA/ATEX/IECEx Approval

Application

• Sour Gases
• Oil and Gas Drilling
• Measurement While Drilling
• Cementing
• Mud Pumps / Mud Logging
• Fracturing
  

Specification

Performance
Pressure Range	Up to 20,000 psi
Accuracy	B.F.S.L. ≤ 0.25% of full scale
	NIST up to ± 0.1% available in select ranges
Temperature Effects on Zero & Span	± 0.026% FSO/°C (± 0.01% FSO/°F)
Life Expectancy	10 million cycles minimum
Frequency Response	Less than 5mS
Electrical
Supply Voltage	10-28 VDC on sensor
Loop Resistance	1012 ohms @ 28 VDC decreasing linearity to 0 ohms @ 10 VDC
Insulation Resistance	>100 megohms @ 500 VAC, 70°C
Shunt Cal	100% of Full Scale
Connectivity
Outputs	4-20mA
	0-5 VDC
Internet Connectivity	with RST-5003 (4-20mA version only)
Output Signal @ 21° C	4-20 mA: 3-30 mA max
	0-5 VDC: 110 mA inrush current
	0-5 VDC: 3.5 mA operating current

Download Data Sheet: Recalibratable Incoloy Hammer Union Pressure Transmitter HU1502I

Ref: apgsensors.com