Bamo Level Compact Overfill Detector MAXIMAT CX

 Level Compact Overfill Detector MAXIMAT CX

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Level Compact Overfill Detector MAXIMAT CX

MAXIMAT CX compact overfill detectors are level limit switches which are used to prevent overfilling of containers with water polluting liquids. When an electrically conductive liquid comes into contact with the detector stem, the integrated electronics respond by interrupting the continuous output signal. This signal can be read out from the system controller as an acoustic and optical alarms and, if required, can be used to cause en emergency shutdown of the filling process.

Features

• All-plastic versions
• Integrated transmitter and connection for test button
• No moving parts
• For storage tanks
• NPN / PNP interface

Application

Overfill detector in accordance with the German Water Resources Act (WHG) for containers used for storing, filling and handling water-polluting, electrically conductive, non-flammable liquids.

Specification

Detection	Capacitive high-frequency sensor, fail-safe detector
Ambient temperature	-20 ... +60 °C
Operating pressure	Atmospheric; Limits: 0.8 to 1.1 bar
Housing head	PBT, fiber-glass reinforced
Protection	IP65 according to EN 60 529
Fittings	See the table ''ordering information''
Power supply	15 ... 27 V DC
Consumption	< 1 W
Outputs	Potential-free Reed contact for low voltage (Normally
	Closed, it opens when alarm occurs)
	Rated: Max. 50 V AC / DC, Max. 0.5 A, Max. 10 VA,
	convenient for operating with a coupling relay or PLC,
	signaling device TC4 / TC1 or CST unit.
	2-wire alarm output reporting
	with transmitter MAXIMAT SHR C
Terminals	Screw terminals, cable max. 2.5 mm²
Additional function	Connection of an external test button (potential-free
	contact), for a complete diagnostic of the device integrity
	(connection loops, electronics).
Connection options	Alarm units: MAXIMAT TC1 / TC4
	Coupling relay: CST
	Transmitter: MAXIMAT SHR C
	Automation with PLC

Download Data Sheet: Level Compact Overfill Detector MAXIMAT CX

Ref: bamo.eu

Another Article:

Hengesbach Level Module for Installation in Level Probes Tyoe NM
Takuwa Water Level Gauge Sensor
Mac3 Float Level Switch
Hengesbach Level Module NC1 Series
Mechatronics Dizzi Fluid Level Sensor