Bamo Level Detection for Oil-Water Separators RAC 531

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Level Detection for Oil-Water Separators RAC 531

RAC 531 is designed for the monitoring of hydrocarbon fluids separators. With the sensor, OP/10 (OP/5) the alarm device detects when the maximum thickness is reached. The alarm device has a built-in buzzer. A jumper may disable its function; in this configuration, the lighting alarm and relay output inform the current ALARM status to the operator.

The alarm device has an auto-diagnostic of measuring loop and of device integrity. An alarm signal occurs in case of dysfunction. There are three marks on the sensor for easy fitting according to the highest hydrocarbon layer thickness.

Features

• Survey of an oil-water separator
• Wall mounting cabinet, IP 65
• Easy fitting, intuitive configuration
• Detection of highest hydrocarbon layer thickness
• Relay output, changeover contact
• Audible and lighting alarm
• OEM version on request
• Certification: ATEX

Application

Monitoring of hydrocarbon level in oil-water separators.

Another Article: Hengesbach Level Module for Installation in Level Probes Type NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor

Specification

Main power supply:	230 V – 50/60 Hz ±10 %
Power consumption:	~ 2 W
Housing protection:	IP65, according to EN 60529
Temperature limits:	-20...+60°C
Housing material:	Polycarbonate cabinet; 120x80x55 mm
Sensor input:	For 1 sensor, detection for hydrocarbon fluids layer thickness
Monitoring:	The alarm device NIVOIL has an auto-diagnostic of measuring loop and system integrity.
Display and signals:	Green LED for normal status
	Yellow LED when the alarm occurred and not yet reset
	Red LED for alarming status
	Built-in audible alarm, disabled with a jumper
Operating:	Through 1 push button for diagnostic test and alarm clearance
Output:	1 relay output, 230 V AC, 3A, potential free change over contact
Ex protection class:	II (1) G [Ex ia Ga] IIB/IIA
ATEX Certificate:	BVS 12 ATEX E 019 / This cabinet must be fitted in the safe area
CE Marks:	According to Low Voltage Guidelines: 2006/95/CEE) and EMV Guidelines: 89/336/CEE

Download Data Sheet: Level Detection for Oil-Water Separators RAC 531

Ref: bamo.eu