Bamo Pressure Transmitter TP 805

Bamo Pressure Transmitter TP 805

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Pressure Transmitter TP 805

Accuracy, reliability, corrosion resistance and mechanical load upper limit, make this top quality pressure transmitter a suitable product for a wide variety of industrial applications. The pressure transmitter is based on a piezo-resistive sensor for which the ceramic diaphragm fits a stainless steel body to resist to aggressive chemicals. Materials in use and the technology implemented make this sensor particularly resistant to vibrations and mechanical shocks.

Commissioning is easy and fast. The pressure transmitter is factory adjusted to its measuring range and can not be modified on site. It does not require maintenance.

Features:

  • Compact and robust construction
  • Output signal: 4-20 mA; 2-wire
  • Pressure: 0 ... 2.5 barg up to 25 barg
  • AISI 316 Fitting: ½" G or ¼" G
  • Ceramic diaphragm

Application:

The pressure transmitter is used for pressure measurements, continuously in real time, of gases and liquids.

Another Article:

Specification:

Pressure ranges0... 2.5 up to 0 ... 25 barg
Overload limit:2.5 times the full scale
Accuracy±0.5 % F.S.
Inclusive: variations on zero point, end of range, linearity, hysteresis and repeatability 
Response time< 2 ms
Fluid temperature-15 ... +125 °C
Ambient temperature-30 ... +85 °C
Temperature incidence±0.2%F.S./10K
 Test conditions: At 25 °C
Output signal4 ... 20 mA
Power supply7 ... 33 V DC, 2-wire loop
Protected against short circuit and reverse polarity 
Isolation voltage500 V DC
Electric protectionClasse III
ConnectionsConnector DIN; EN 175301-803-A
 Cable Ø 6 ... 8 mm
ProtectionIP 65 (connector DIN mounted)

Materials:

 
Body and fittingAISI 316 L (1.4404)
SealFPM
SensorPiezo-resistive with ceramic diaphragm Al₂O₃ (96 %)
ConnectorPolyamide 50 % GF UL 94 V-0

Mounting:

 
FittingMale threads: G ¼" or G ½"
Mounting positionVertical, connector upward (recommended)
Mass90 g

Agreements

 
Electromagnetic compatibilityDirective EN 61326-2-3
EMC additionalDirective EN 50121-3-2
Mechanical Tests & Environmental TestsProcedures IEC 68-2-27 & IEC 68-2-29
Vibrations, mechanical testsProcedures IEC 68-2-6

Download Data Sheet: Pressure Transmitter TP 805

Ref: bamo.eu

Berbagi:  

Komentar

Articles