E2E-X T1 AC/DC 2-Wire Models, Omron-Standard Proximity Sensor

E2E-X T1 AC/DC 2-Wire Models, Omron-Standard Proximity Sensor

E2E-X T1 AC/DC 2-Wire Models, Omron-Standard Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Features and Benefits

  • Standard Sensors for detecting ferrous
  • A wide array of variations. Ideal for a variety of
  • Models with different frequencies are also available to prevent mutual
  • Superior environment resistance with standard cable made of oil-resistant PVC and sensing surface made of a material that resists cutting
  • Useful to help prevent
  • Cable protector provided as a standard feature

Ratings and Specifications

Size Shielded

Item                             Model

Sensing distance3 mm ±10%7 mm ±10%10 mm ±10%
Set distance0 to 2.4 mm0 to 5.6 mm0 to 8 mm
Differential travel10% max. of sensing distance
Detectable objectFerrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 17.)
Standard sensing objectIron, 12 ´ 12 ´ 1 mmIron, 18 ´ 18 ´ 1 mmIron, 30 ´ 30 ´ 1 mm
Response frequency *1DC1 kHz0.5 kHz0.4 kHz
AC25 Hz
Power supply voltage (operating voltage range) *2

24 to 240 VDC (20 to 264 VDC)

48 to 240 VAC (40 to 264 VAC)

Leakage current

DC: 1 mA max.

AC: 2 mA max.


Control output

Load current5 to 100 mA
Residual voltageDC: 6 V max. (Load current: 100 mA, Cable length: 2 m) AC: 10 V max. (Load current: 5 mA, Cable length: 2 m)
IndicatorsOperation indicator (red), Setting indicator (green)
Operation mode (with sensing object approaching)


NO (Refer to the timing charts under I/O Circuit Diagrams on page 21 for details.)

Protection circuitsLoad short-circuit protection (20 to 40 VDC only), Surge suppressor
Ambient temperature rangeOperating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity rangeOperating/Storage: 35% to 95% (with no condensation)
Temperature influence±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength4,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistanceDestruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protectionIEC 60529 IP67, in-house standards: oil-resistant
Connection methodPre-wired Models (Standard cable length: 2 m)
Weight (packed state)Approx. 80 gApprox. 140 gApprox. 190 g





CaseNickel-plated brass
Sensing surfacePBT
Clamping nutsNickel-plated brass
Toothed washerZinc-plated iron
AccessoriesInstruction manual

Download Catalog: Standard Proximity Sensor E2E

Ref: Omeron.co.id