Flux Drum Emptying Systems VISCOFLUX lite Ex

Flux Drum Emptying Systems VISCOFLUX lite Ex


VISCOFLUX drum emptying systems were specially developed for emptying lidded drums with high-viscosity contents. The medium is continuously and particularly careful extracted with FLUX eccentric worm-drive pumps. All systems achieve an almost complete emptying of the drum with < 1 % residual amount (under 2 % for drums with in liners). Whereas the VISCOFLUX lite is ideal for pumping high-viscosity media barely capable of flowing the VISCOFLUX and VISCOFLUX mobile are capable of pumping high-viscosity media not even capable of flowing by themselves.

In the Ex version it is suitable for the use in hazardous areas of zone 1 and for transferring a wide variety of flammable media (zone 0/1). The system transports the media gently and continuously. Like the VISCOFLUX, the VISCOFLUX lite and the VISCOFLUX mobile, the VISCOFLUX lite Ex leaves just less than 1 % of the media in the drum.

Advantages:

  • Resource-saving – up to less than 1 % residue
  • Efficient use of the medium and low expenditure for disposal
  • Continuous and gentle transport, no structural change of the medium
  • Customized solution due to individual selection of drive motor in combination with matching eccentric worm-drive pump
  • Fast cleaning as system can be quickly dismantled
  • Process reliability due to hermetical sealing of the medium even if the transfer process is interrupted
  • High flexibility due to low installation height - also suitable for working rooms with relatively low ceilings
  • Simple extension due to comprehensive range of accessories (flow meter, hoses, fittings etc.)
  • Quick to install with few components
  • Version available for the use in hazardous areas zone 0/1

Application:

  • Substances just capable of flowing
  • Soft lubricating greases up to NLGI class 2 (e. g. machinery greases)
  • Leveling compounds
  • Base materials for paints and varnishes
  • Solvent-based blend pastes
  • Coating compounds (base coats)
  • Adhesives/construction glues/fixing compounds
  • Corrosion protection gels

Another Article:

Specification:

For drums200 L, ISO drums, sea container drums
DimensionsInner Ø 571,5 mm,
 top Ø 540 mm,
 bottom Ø 571
ComponentsPump centring plate, follower plate + process seal
Ex-markingII1GIIBTX
Air-connectionQuick coupling type 26 (6-8 bar)

Materials

 
Pump centring platePE conductive
HandlesStainless steel 316 Ti
Compressed-air hosePA conductive
Follower plateStainless steel 1.4404/316 Ti
 Pump guidance PE conductive (5 hole pattern)
Process sealFKM static dissipative, black
 NBR conductive, black
 EPDM conductive, black
 5 hole pattern, LK 460 mm

Weight

 
Pump centring plateApprox. 7.5 kg
Follower plate with process sealApprox. 13.6 kg

Eccentric worm-drive pumps

 
TypeF 550 GS6X/GSX/SX
With outer diameter50 mm
Delivery rate max. (dependent on pump, motor, medium)30 l/min
Immersion length1000 mm

Download Data Sheet: Drum Emptying Systems VISCOFLUX lite Ex

Ref: flux-pumps.com

Berbagi:  

Komentar

Articles