Flux Drum Pump Sealless F 424 / FP 424

FLUX drum and container pumps are always a "double act" comprising motor and pump. Both components can vary quite flexible. For example different pumps are able to be driven with the same motor. Ideal for reliable pumping of various low-viscosity liquids - incl. especially aggressive and highly flammable ones. As a result of their low weight the pumps can be easily carried from container to container. The easy handling of motor and pump keeps changeover times short.

The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. The F/FP 424 in stainless steel can also be used in hazardous areas.

Features:

• No seal in the liquid area
• Long spiral-shaped guide bearing
• Multiple beared drive shaft
• Radial shaft seals prevent the intrusion of vapours and liquid in the coupling area
• Versions for the operation in hazardous area available
• Version free of non-ferrous metal for transferring AdBlue^® available
• Can be combined with various motors as required

Advantages:

• No seal wear
• Optimal emptying of the inner tube
• High service life
• Low wear of guide bearing and shaft
• Long life circle of bearings
• Particularly suited for hydrochloric acid and chromic acid
• Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
• Low vibration
• Stainless steel version for use in hazardous area
• Versions for use with AdBlue^® also available
• Also available in High Temperature (HT) version up to 60°C (140°F)

Application:

Outer tube polypropylene:

Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water

Outer tube material polyvinylidene fluoride:

Hydrobromic acid, chromic acid, chloric acid, hydrofluoric acid (hydrofluoric acid), battery acid, nitric acid, nitrous acid, sulfuric acid, acetic acid to 80 %, methyl sulfuric acid, perchloric acid, peracetic acid, phosphoric acid, potassium (Javelle water), sodium hypochlorite (sodium hypochlorite), sodium chloride (table salt), potassium chloride, sodium sulfate, sodium carbonate

Outer tube material stainless steel:

Petroleum, diesel, heating oil, hydraulic oil, engine oil, engine oil, gasoline, formic acid (85 %), ethyl glycol, petroleum, "MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit, diesel

Another Article: Flux Drum Pumps, Barrel Pumps and Container Pumps Flux Eccentric Worm - Drive Pumps F 560 GS Flux Eccentric Worm - Drive Pumps F 550 S Flux Eccentric Worm - Drive Pumps Flux Air-Operated Diaphragm Pumps FDMH 25

Specification:

• Flow rate: max. 240 l/min¹
• Delivery head: max. 30 mwc²
• Viscosity: min. 1 mPas - max. 1200 mPas²
• Outer tube diameter: min. 40 mm³ - max. 50 mm³
• Immersion length: 700, 1000, 1200
• Materials outer tube: Polypropylene, Polyvinylidene fluoride, Stainless steel
• Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels, Aqueous salt solutions, Aggressive media
• Seal: sealless
• Container: Small containers, Hobbocks, 200 l drums, 1000 l IBC

Download Data Sheet: Drum Pump Sealless F 424 / FP 424

Ref: flux-pumps.com