Fuji TECHNOSHOT TS2060/TS2060i HMI

 The programmable displays in the TECHNOSHOT TS2000 Series are easy-to-see, and have bright TFT color liquid crystal screens. A high-resolution display and high-speed response display give TECHNOSHOT TS2000 Series panels a high power of expression.

Fuji TECHNOSHOT TS2060/TS2060i HMI

Specifications

 TS2060TS2060i
Power supplyRated voltage24VDC
Permissible range of voltage24VDC ± 10%
Permissible momentary power failureWithin 1ms
Demand (maximum rating)13W or less
Insulation resistanceBetween DC external terminal and FG: 500VDC 10MΩ or more
Physical environmentAmbient temperature0 degC ~ +50 degC *1
Ambient humidity85%RH or less (without dew condensation) *1
Operation altitude2,000 meters or lower
AtmosphereNot to be exposed to corrosive gas, or conductive dust
Storage temperature-10 ~ 60 degC *1
Storage humidity85%RH or less (without dew condensation) *1
Overvoltage categoryCategory II
Contamination levelLevel 2
Mechanical operating conditionsResistance to oscillationComplies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
Resistance to shockComplies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total)
Electric operating conditionsResistance to noiseNoise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns
Resistance to static dischargeComplies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditionsGroundingGrounding resistance: Less than 100Ω, FG/SG separation
Protection StructureFront panel: Complies with IP65 (when waterproof gasket is installed) Rear cover: Complies with IP20
Installation methodPanel mounting
Cooling systemNatural air cooling
Dimensions W*H*D(mm)182.5 x 138.8 x 45.8mm
Panel cutout (mm)174.0(-0,+0.5) x 131.0(-0,+0.5) mm (same as V806/V606e)
Case color Black
Battery Coin type lithium battery, lifetime: 5 years (ambient temperature 25 degC)
Material PC
  • *1: Wet-bulb temperature should be 39°C or lower to prevent malfunction.

Performance specifications

 TS2060TS2060i
Screen program memory (FROM) 2.5MB10.5MB
Backup memory (SRAM) 128KB512KB
Stroke fonts N/ASupported
DisplayDisplay deviceTFT color
Resolution320 x 240
Display size5.7" (QVGA)
Colors65,536 colors (selection of 32K/256/128/monochrome available with software configuration.)
BacklightLED
Backlight lifetime50,000 hours
Touch switchTypeAnalog resistance film
Function switchesNumber of the function switches6
External interfaceD-Sub 9-pin *2N/ARS-232C/ RS-422/485, Asynchronous type, Data length: 7, 8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
Modular 8-pin(MJ1/MJ2)RS-232C/ RS-422 (4-wire) *3, RS-485 (two-wire), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 bps *4
SD cardN/A1 slot, as standard equipment (SD/SDHC card)
EthernetN/A1CH, 100Mbps/10Mbps
USBType mini-B(Ver.2.0)Type A、Type mini-B(Ver.2.0)
Communication unitN/ACUR-xx supported
ClockBackup period5 years (Ambient temperature 25 degC)
Calendar accuracyW/ power supply: gap ±210 sec. per month (Ambient temperature 25 degC) W/o power supply: gap ±90 sec. per month (ambient temperature 25 degC, when battery backup is used.)
StandardsCEEN61000-6-2, EN61000-6-4, EN50581
UL/cULUL61010-1, UL61010-2-201
KCCompliant
  • *2: Available only when DUR-00 is attached to TS2060i.
  • *3: Only MJ2 supports 4-wire system.
  • *4: 187500bps is available only when connected with SIEMENS MPI/PPI . MPI/PPI connection is supported only with MJ2.
Berbagi:  

Komentar

Articles