M18 E2B, Omron Proximity Sensor


M18 E2B, Omron Proximity Sensor

The new E2B proximity sensors promise the perfect fit for your particular needs. With the wide range of models in the E2B family, you can choose the one that exactly meets your needs. For example, we have four different sizes: M8, M12, M18, and M30, each one with single or double sensing distances, shielded, and unshielded. There’s also a choice of short and long bodies, two connecting methods, and four output types. With this range to choose from, you’re certain to find the perfect fit.


  • Perfect fit for standard environments
  • 372 models
  • Single and double sensing distances (M8, M12, M18, and M30)
  • Time and cost-saving
  • Global deliveries and support







Sensing distanceSingleDouble
Sensing distance5 mm ± 10%10 mm ± 10%8 mm ± 10%16 mm ± 10%
Setting distance0 to 4 mm0 to 8 mm0 to 6.4 mm0 to 12.8 mm
Differential travel10% max. of sensing distance
Detectable objectFerrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object (mild steel ST37)18 × 18 × 1 mm30 × 30 × 1 mm24 × 24 × 1 mm48 × 48 × 1 mm
Response frequency (See note 1.)600 Hz400 Hz500 Hz400 Hz
Power supply voltage10 to 30 VDC. (including 10% ripple (p-p))
Current consumption10 mA max.
Output type

-B models: PNP open collector

-C models: NPN open collector

Control outputLoad current200 mA max. (30 VDC max.)
Residual voltage2 V max. (under load current of 200 mA with cable length of 2 m)
IndicatorOperation indicator (Yellow LED)

Operation mode

(with sensing object approaching)

-B1/-C1 models: NO

-B2/-C2 models: NC

Protection circuitOutput reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
Ambient air temperatureOperation and storage : -25 to 70ºC (with no icing or condensation)
Temperature influence

±10% max. of sensing distance at 23ºC within temperature range of -10 to 55ºC

±15% max. of sensing distance at 23ºC within temperature range of -25 to 70ºC

Ambient humidityOperation and Storage: 35 to 95%
Voltage influence±1% max. of sensing distance in 24 V ±15%
Insulation resistance50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance1,000 m/s2, 10 times each in X, Y and Z directions
Standard and listings(1) IP67 (IEC60529) (2) EMC (EN60947-5-2)
Connecting methodPre-wired models (standard is 4 mm dia. PVC cable with length = 2 m, 5 m). Connector models (M12-4pin)
Weight (packaged)Pre-wired modelShort body: Approx. 95 g, Long body: Approx. 110 g
Connector modelShort body: Approx. 60 g, Long body: Approx. 80 g



CaseBrass-nickel plated
Sensing surfacePBT
CableStandard cable is 4 mm dia. PVC.
Clamping nutBrass-nickel plated

Note: 1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object between sensing objects, and a set distance of half the sensing distance.


Ref: Omron.co.id