Pepperl+Fuchs M100/MV100-RT/76a/95/103 Thru-beam sensor

 M100_MV100-RT_76a_95_103 Thru-beam sensor

The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.

Another Article: Pepperl+Fuchs M100/MV100-RT/35/76a/95/103 Thru-beam sensor Pepperl+Fuchs LA39/LK39/31/40a/116 Thru-beam sensor Pepperl+Fuchs LA31/LK31/25/31/115 SET Thru-beam sensor Danfoss DST P92S Pressure Transmitter for SIL-2 Applications Danfoss MBS 1900 Pressure Transmitter for Air and Water Applications

Features

• Miniature design
• Easy to use
• Very bright, highly visible light spot
• Full metal thread mounting
• Highly visible LEDs for Power ON and switching state
• Not sensitive to ambient light

Technical Data

System components
Emitter		M100-RT/76a/95
Receiver		MV100-RT/95/103
General specifications
Effective detection range		0 ... 10 m
Threshold detection range		15 m
Light source		LED
Light type		modulated visible red light
Diameter of the light spot		approx. 1 m at a distance of 15 m
Angle of divergence		approx. 2 °
Optical face		frontal
Ambient light limit		EN 60947-5-2
Functional safety related parameters
MTTFd		860 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Control elements		sensitivity adjustment
Control elements		Light-on/dark-on changeover switch
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		Emitter: ≤ 15 mA Receiver: ≤ 8 mA
Input
Test input		emitter deactivation at +UB
Output
Switching type		The switching type of the sensor is adjustable. The default setting is: light on
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		1000 Hz
Response time		0.5 ms
Conformity
Product standard		EN 60947-5-2
Approvals and certificates
UL approval		cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width		11 mm
Housing height		31 mm
Housing depth		20 mm
Degree of protection		IP67
Connection		M8 x 1 connector, 4-pin
Material
	Housing	PC (Polycarbonate)
	Optical face	PMMA
Mass		approx. 20 g (emitter and receiver)
Tightening torque, fastening screws		0.6 Nm

Download Datasheet: Pepperl+Fuchs M100/MV100-RT/76a/95/103 Thru-beam sensor

Reference: pepperl-fuchs.com