Pulsarpoint 310 Pulsar Rotating Paddle Switch

Pulsarpoint 310 is a rotating paddle level switch for level measurement and switching on bulk solids. The paddle's rotation is interrupted when material reaches the paddle, causing a clutch to disengage the motor. This in turn actuates a relay allowing an alarm signal to be switched. This may be used to signify a material level as being high, intermediate or low depending on configuration chosen.

The Pulsarpoint 310 has a diecast aluminium housing sealed to IP66, with process connection in aluminium, or stainless steel. Various paddle materials are available along with options on seals for aggressive media applications. The Pulsarpoint 310 level switch is available for high application temperatures of up to +600ºC. It is also available with ATEX dust approval for Zone 20, 21 and 22.

Another Article: Pulsarpoint 300 Pulsar Rotating Paddle Switch Paddle Level Switch Float Level Switch parker JF-302T Rotary Paddle Level Switch Parker JC7 Vantsu SC-YC Series, Vibrating Probe Level Switch

Features

Applications

• Solids point level measurement
• Dust level measurement
• Switching on bulk solids
• Block chute detection
• Industries such as food and beverage, animal feed, pharmaceutical, chemical, plastics, quarrying, power generation and cement
• Monitoring materials such as plaster, cement, chalk, lime, granules, wood chips, cereals, cocoa, sugar, animal feeds, washing powders or plastics powders and pellets

Specifications

Technical Specification Pulsarpoint 300 and 310

Voltage: (5 versions):	240, 110, 48, 24VAC 50/60HZ, 24V DC (Universal Voltage option)
Installed load:	3VA
Switched output:	Max. load 250VAC, 2A, 500VA or 300VDC, 2A, 60W

Technical Specification Pulsarpoint 300

Housing:	Plastics PA6 IP66
Cable entry:	1 entry with M20 x 1.5. 2nd entry optional
Process connection:	1½ “ DIN 228 (1½” BSP)
Process connection material:	Plastics PA6
Shaft material:	Stainless steel
Paddle material:	1.4301 (SS304)/ 1.4305 (SS303)
Bearing and seal:	Slide bearing, shaft seal to DIN 3760
Shaft speed:	1 rpm or 5 rpm with 1.3 second switching delay
Minimum bulk density:	Adjustable in 3 steps from 100g/litre
Process temp and pressure:	-20C (-4F) (-40C/-40F with optional heater) to +80°C (+176°F) and +0.8bar (5 & 10 bar options)

Technical Specification Pulsarpoint 310 and ATEX IEC-Ex OPTION

Housing:	Aluminium die cast IP65
Cable entry:	1 entry with PG13.5 gland. 2nd entry optional
Process connection:	1½ “ DIN 228 (1½” BSP) or optional flange
Process connection material:	Stainless steel, aluminium, galvanised
Shaft material:	Stainless steel
Paddle material:	Stainless steel
Bearing and seal:	Ball bearing, shaft seal to DIN 3760
Shaft speed:	1 rpm or 5 rpm with 1.3 second switching delay
Minimum bulk density:	15g/litre (0.94lbs/ft3)
Process temp and pressure:	-20C (-4F) (-40C/-40F optional heater) to +80°C (+176°F) and +0.8 bar (5 &  10 bar options)
Flammable atmosphere version:	Dust: ATEX 1/2D Ex ia D20 (Zone 20, 21 and 22)
High temperature option:	600°C (1112°F) (not Ex version)

Download Datasheet: Pulsarpoint 310 Pulsar Rotating Paddle Switch

Reference : pulsar-pm.com