Weidmuller IT-TIMER Analogue Signal Processing

Timing relays are used in automation engineering in order to compensate for malfunctions caused by high clock rates.

Short pulses are extended and hence are reliably identified by downstream control components.

Various timing functions such as make and break delays, clock generator, and star/delta switchover are available to users.

Specifications

Dimensions and weights

Width	17.5 mm
Width (inches)	0.689 inch
Height	98 mm
Height (inches)	3.858 inch
Depth	57.9 mm
Depth (inches)	2.28 inch
Net weight	58 g

Temperatures

Humidity	25 - 75%, no condensation
Operating temperature, max.	50 °C
Operating temperature, min.	-25 °C
Storage temperature, max.	70 °C
Storage temperature, min.	-40 °C
Operating temperature	-25 °C...50 °C
Storage temperature	-40 °C...70 °C

 

Another Article: Omron Terminal Relay G6D-F4PU / G3DZ-F4PU, G6D-F4B / G3DZ-F4B Matsushima Magnetic Type Speed Relay Power Connectors HP Series- Amphenol Plugs & Jacks T-Series SwitchPlug, Connector-Amphenol MP-41 Multipin-Amphenol, Connectors

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Input

Rated control voltage	24...48 V DC - 15 % / + 10 % / 24...240 V AC - 15 % / + 10 %
Power rating	8 VA @ 230 V AC, 0.4 W at 24 V DC
Status indicator	LED green (U/t): flashes when time runs, lights permanently with supply voltage applied, LED yellow (R): relay closed
Repeat accuracy	< 0.5 % or ±5 ms
Setting tolerance	5 %
Basic accuracy	< 1.5 % (of scale-end value)
Min. pulse duration	50 ms
Time ranges	0.05 s - 1 s, 0.5 s - 10 s, 3 s - 60 s, 0.5 min - 10 min, 3 min - 1 h, 0.5 h - 10 h
Timing function	On delay, Off-delay with control input, Single-shot rising edge with control input, Single-shot rising edge supply voltage controlled, Single-shot falling edge with control input, Clock generator pause first, Flip-flop/latching
Max. reset time after voltage interruption	100 ms

Output

Rated switching voltage	250 V AC
Rated switching voltage Voltage type AC max. 250 V
Max. switching voltage, AC	250 V
Max. switching voltage, DC	30 V
Continuous current	5 A
Continuous current Current 5 A
AC switching capacity (resistive), max.	1250 VA
DC switching capacity (resistive), max.	90 W
Min. switching power	10 mA @ 12 V, 100 mA @ 5 V

Contact data

Contact type	1 CO contact (AgNi)
Mechanical service life	1 x 106 switching cycles

General data

Version	with separate control input
Rail	TS 35
Test button	No
Mechanical switch position indicator	No
Resistance to vibration EN 61812-1	10 Hz...60 Hz: 0.15 mm, 60 Hz...150 Hz: 2 g

Insulation coordination

Rated voltage	300 V
Surge voltage category	II
Pollution severity	2
Protection degree	IP20
Dielectric strength, Input/Output	1.6 kV
Creepage and clearance distance input – output	≥ 3 mm
Impulse withstand voltage	2.5 kV

Connection data

Wire connection method	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.25 mm²
Clamping range, max.	2.5 mm²
Wire connection cross section AWG, min.	AWG 23
Wire connection cross section AWG, max.	AWG 14
Wire cross-section, solid, min.	0.25 mm²
Wire cross-section, solid, max.	2.5 mm²
Wire connection cross-section, finely stranded, min.	0.25 mm²
Wire connection cross section, finely stranded, max.	2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.	0.25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	0.25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	2.5 mm²
Blade size	size PH1

Classifications

ETIM 6.0	EC001439
ETIM 7.0	EC001439
eClass 9.0	27-37-16-05
eClass 9.1	27-37-16-05
eClass 10.0	27-37-16-05

Approvals

Approvals	CE, EAC
ROHS	Conform

Download Datasheet: Weidmuller IT-TIMER Analogue Signal Processing

Reference : weidmueller.com