A.I. Tek Instruments Tachometers Tachpak 30 Series

 


AI-Tek Instruments offers fast response and high-precision tachometers for monitoring and protection of critical processes. Our prices reflect a high degree of design, quality, ruggedness, and engineering. What you really get with AI-Tek Instruments is a superb price-performance ratio.

Not all tachometers are the same, and this is certainly true of the AI-Tek Instruments tachometry line. Designed with severe industrial environments in mind, these units will provide reliable around-the-clock operation for years under adverse conditions. AI-Tek Instruments is a leader in manufacturing this type of instrument.

AI-Tek has taken its years of experience in designing and manufacturing tachometers for Military, Petro-Chem, Industrial, Rail, Power Generation, and Marine industries and put that expertise into every tachometer we make. Either TACHTROL or TACHPAK, any of the wide range of standard and custom sensors will integrate seamlessly with our tachometers.

The new generation TACHPAK and TACHTROL series tachometers have been designed with all of the functions and durability embodied in the previous tachometer series as well as improvements to extend performance, accuracy, and function.

With the exception of the Tachtrol 20, both TACHPAK and TACHTROL now share a common processing platform. This commonality allows both to perform identical tachometry functions, streamlines programming, and minimizes the learning curve.

The main physical difference between the two is the characteristic integrated display function found in all TACHTROL series tachometers.

The Tachometers Tachpak 30 Series computing tachometer is DIN rail mounted, can measure two independent speed input frequencies, convert them to relevant units that drive visual displays, mechanical & solid state relays, and analog output.

AI-Tek Tachometers are highly configurable microprocessor-based instruments that provide measuring, monitoring, and control to critical equipment. All aspects of speed sensor input signal validation, mathematical manipulation of the signal, and output control response behavior are user-defined.

Speed sensor signals are input into the tach and analyzed to be valid, mathematically manipulated into units relevant to the user then assigned to define the behavior of the display, analog output, and relays. The software program keeps safety, accuracy, and response time at the top of the task hierarchy.

Features

  • DIN rail mount
  • USB
  • 2 Sensor inputs
  • Remote Display Compatible
  • Mathematical functions
  •  Analog Output
  • AC (80-264VAC)/DC (12-30VDC) Power
  • 2 Solid State relays
  • 2 Mechanical Relays
  • Plotting

Another Article:

Specification

Relays (Solid State) 
Response Time (operate and release)Operate: 2 ms max, 0.8 ms typical
 Release: 0.5 ms max, 0.1 ms typical
Electrical Isolation500 Vrms, 1 minute
Analog Output 
AccuracyInternal instrument accuracy: ±.005%; plus ±.05% of full-scale range at room temp with 400 ohm load;
 ±0.1% over temp range and load range. Unit is factory calibrated. Can be re-calibrated using TACHLINK.
Response TimeInput to output 6.55 msec+ 1 msec settle at 1kΩ (worst case) to .1% of final value
Display (applies to TT & plus) 
ResolutionBlack and White graphics display. 64x128 Pixels.
Accuracy±.05% of the full scale
Communication ProtocolRS485: 19.2kbaud, 8-n-1 protocol, Half duplex,
 The tachometer is bus master
Input Power 
Power consumption3.5 watts, typical for tachometer only
 Add 0.5 watts per remote display
 Add 2.0 watts for 12V out
 9.5 watts max.
Power SharingRegulated to 12 volts @ 150mA when the input voltage is 13.6 volts and above.
 Below 13.6 volts, output voltage ≈ input voltage –1.5V.

Download Data Sheet: Tachometers Tachpack 30 Series

Ref: aitekinstruments.com

Contact us: sales@wmablog.com or visit our E-Commerce



Berbagi:  

Komentar

Articles