Analog Input Module CAIM Connex Compatible, Flocorp-Monitor

FLO-CORP’s wireless cellular monitors have the ability to monitor multiple field devices of any type (i.e. level, flow, pressure, temperature, pH) and transmit the data to an online cloud-based portal for remote monitoring. The software capabilities include filtering tanks by-product, checking battery levels and network status, monitoring multiple tanks at one time, and viewing current tank inventory, inventory history, and alarm information.

The Analog Input/Output Module for the CONNEX 3D™ Flexible Meter provides the input from a variety of standard analog inputs such as flow, level, pressure, temperature, pH, and analytical inputs to standard field instruments and measurements. Analog input modules offer superior isolation and filtering for input and output to meet integrated system monitoring solutions. High data integrity for scalable measurements facilitates conversion to serial RS-485 digital communications using MODBUS RTU (Master & Slave) on three isolated communication ports. Easy plug-in connection to the CONNEX 3D™ Digital Display Module (CDDM), CONNEX 3D™ Pump and Relay Control Module (DXM1), CONNEX 3D™ TCP/IP Ethernet Module (C485), CONNEX 3D™ Data Logger and Cellular Modem Module (CELL) and CONNEX 3D™ Radio Module (CDRM) for high performance wired or wireless monitoring.

Analog Input Module CAIM Connex Compatible, Flocorp-Monitor | Descriptions

The CONNEX 3D™ is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect to each other. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.

Another Article: McCROMETER FPI Mag Electromagnetic Flow Meter McCROMETER V-Cone Flow Meter McCROMETER VM V-Cone McCROMETER Wafer Cone McCROMETER ExactSteam™ V-Cone® Flowmeter

Specification

ANALOG INPUT MODULE			ANALOG OUTPUT	4-20mA isolated output
ANALOG INPUTS	Up to 4 channels
			TRANSMITTER POWER SUPPLY	10 to 30 VDC or 90 to 240 VAC 50/60 Hz
ISOLATION	Complete Analog Out
			SERIAL	2
RESOLUTION	12 Bits
I/O MODE	Voltage & Analog - Current		INTERFACE	2 RS-485 with 3-wire terminal blocks
INPUT RANGE	4 to 20 mA		PARITY	Non-Fixed
ACCURACY	0.1%FSR @25  C, 0.5%FSR@-40 and 75 C		DATA BITS	8
SAMPLING RATE	1.5 samples / sec		STOP BITS	1, 2
BUILT-IN RESISTOR FOR CURRENT INPUT	240 ohms		BAUDRATE	9600 to 921600
			PROTOCOLS	Modbus RTU (Master, Slave)
POWER REQUIREMENTS	10-28 VDC
			Specifications are subject to change without notice.

Ref: Flo-Corp.com

Contact us : sales@wmablog.com or visit to our E-Commerce

Download Datasheet: Analog Input Module CAIM CONNEX COMPATIBLE, Flocorp-Monitor