Radio Module (CDRM) CONNEX COMPATIBLE
The Radio Module for CONNEX 3D™ Flexible Process Meter is a wireless I/O monitoring solution solving vast numbers of industrial automation challenges using point-to-point radio communications. Never trench or run conduit and wires again. The savings of hardware and installation cost is significant and will provide fast, reliable remote monitoring and control/alarming to the CONNEX 3D™ monitoring solution.
The CONNEX 3D™ is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect to each other. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.
Features and benefits
- Replicate raw signals in either direction
- No software or programming required
- Easily mounts on 35 mm DIN raiils
- Class I, Div 2 (Zone 2)
- -40ºF to 176ºF (-40º to 80ºC)
- 900 MHz or 2.4 GHz radio operation
- Secure AES encryption
- 5-year warranty
Another Article: |
Specification
FREQUENCY | 902-928 MHz or 2.4 GHz License-Free ISM Band | CONTROLLED LOCAL SHUTDOWN(ESD) | Yes, via Provided Dry Contact Input | ||
ANTENNA CONNECTOR TYPE | SMA (Female Connector) |
RF LINK ALARM DIGITAL OUTPUT |
Adjustable 2 to 10-Second RF Timeout Trigger (NPN) | ||
DEFAULT TRANSMIT SPEED/ UPDATE |
1 Second | ||||
I/O LINK ALARM DIGITAL OUTPUT | I/O Mismatch, Bus or Module Failure (NPN) | ||||
TURBO TX SPEED BASED ON NUMBER OF I/O MODULES |
1=100 ms, 2-3=200 ms, 4= 250 ms, 5-6=333 ms, 7-11=500 ms, 12-16=1 second | ||||
RF LINK DIAGNOSTICS (LEFT LED) | Green = RF Traffic / Yellow = RF Link Fail | ||||
I/O LINK DIAGNOSTICS (RIGHT LED) | Green = I/O OK, Modules Detected / Red = I/O Link Fail | ||||
OUTDOOR/LINE OF SIGHT MAX RANGE2 | 900 MHz: 6.3 Miles (10.1 Km) 2.4 GHz: 5.7 Mile (9.2 Km) | ||||
SUPPLY VOLTAGE RANGE | 9 - 30 Vdc ( 5 %) | ||||
INDOOR/URBAN RANGE | 900 MHz: 1000 ft (305 m) 2.4 GHz: 300 ft (90 m) | ||||
REVERSE POLARITY PROTECTION |
Yes | ||||
MAXIMUM TRANSMIT POWER (ADJUSTABLE WITH ADVANCE UI) |
900 MHz: 24 dBm (250 mW) 2.4 GHz: 18 dBm (63 mW) | ||||
ADVANCED USER INTERFACE FEATURES |
Test RSSI, Tx Power Adjustment, Force Local Output(s), Set Fail-Safe Parameters, and Additional Diagnostics | ||||
RECEIVER SENSITIVITY | 900 MHz: -101 dBm / 2.4 GHz: -100 dBm | ||||
SPREAD SPECTRUM | 900 MHz: FHSS / 2.4 GHz DSSS | ||||
POWER CONSUMPTION | 35 mA @ 12V AVG (10% Duty Cycle) | ||||
RF SECURITY | 128-bit AES Encryption | ||||
Specifications are subject to change without notice. |
Download Datasheet: Radio Module (CDRM) CONNEX COMPATIBLE, Flocorp-Monitor
Ref: Flo-corp.com
Komentar
Posting Komentar
Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :