Bamo Metallic Flow Controller BR

Metallic Flow Controller BR

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Metallic Flow Controller BR

The BR series controls the flow-rate in a vertical pipe with ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

The setting of the trigger point is possible over the entire measuring range. The actual flow-rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.


  • Vertical mounting
  • 1 adjustable contact
  • Material: stainless steel or brass
  • Pressure limit: up to 300 bar
  • Flow ranges within 0.1 ... 50 l/min


Control of flow in cooling, lubricating piping systems, or in any compatible skids.

Another Article:


Temperature limits-20 ... +100 °C (On request: 160 °C)
Flow Rangesl/min (of water at 20 °C)
Contact typeN.O. (without flow)
ProtectionContact: IP 65
ConnectionDIN 43650 plug-in socket, cable gland PE 9

Brass version

Pressure limit200 bar
BodyNickel-plated brass
FittingsNickel-plated brass
DiverNickel-plated brass
SealsNBR (On request: FPM or EPDM)

Stainless steel version

Pressure limit300 bar
BodyAISI 316 Ti (1.4571)
FittingsAISI 316 Ti (1.4571)
DiverAISI 316 Ti (1.4571)
SealsFPM (On request: NBR or EPDM)

Download Data Sheet: Metallic Flow Controller BR