Bamo Paddle Wheel Flow Sensor BAMOFLU 100

Bamo Paddle Wheel Flow Sensor BAMOFLU 100

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Paddle Wheel Flow Sensor BAMOFLU 100

The liquid flow, causes rotation of a 5-blade paddle wheel with magnetic inserts. Variations of magnetic field produce pulses whose frequency is directly proportional to the speed of the fluid. The liquid may content no more than 2 % of solid particulates, non-magnetite and size < 0.5 mm. The viscosity may be between 0.5 and 20 cSt, beyond which an on-site calibration will be necessary.

Commissioning recommendations:

  • The pipeline must always be full
  • Do not have liquid / gas interfaces
  • The flow-rate must be between 0.8 and 10 m/s
    Refer to the manual for the required straight lengths.


  • On-line flow sensor
  • From ND 15 up to ND 600
  • Output: Rectangular pulses
  • Materials: PVC, PPH, PVDF or AISI 316


BAMOFLU is designed for neutral or slightly aggressive liquids, free from solid particles (demineralized water, pool water after filtration, etc.)

Another Article:


OutputFrom 38 to 45 Hz according fitting vs. pipe I.D.
 Rectangular pulses, 5 ... 24 V DC
Power supply7 ... 30 V DC / 30 mA (stabilized)
 Sensor protected against reverse polarity
Measuring range0.8 ... 10 m/s
Accuracy± 1 % With calibrated frequency converter
Linearity± 1 %
Pressure limitsPPH & PVDF: 10 bar at 20 °C
 AISI 316 L: 25 bar (with stainless steel nut)
Temperature limitsPVC: 40°C; PPH: 85 °C; PVDF & AISI 316: 100 °C
BodyPPH or PVDF or AISI 316 L
Paddle wheelE-CTFE (Halar)
Rotor shaftCeramic (Al2O3)
SealsFPM (standard); EPDM on request
ConnectorPlug DIN 43 650, IP 65

Download Data Sheet: Paddle Wheel Flow Sensor BAMOFLU 100