Down-Draft Grossing Table UCS-E-2000-B with Bridge and Integrated Illumination

 The down-draft grossing table is equipped with air down draft system. This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections.

Airflow travels over the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapours. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to an exhaust system provided by the customer.

The UCS-E-2000-B model includes the following features:

•  
• Workstations with a large surface area
• Entire construction is made of stainless steel (Material no. 1.4301 – ANSI 304)
• Stable, self-supporting undercarriage with adjustable legs
• Low overall height of the upper structure increases leg room
• Height adjustable from 750 to 1000 mm
• Height adjustable with UP/Down push bottom
• Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm
• Basin includes integrated air vacuum
• Very sturdy, perforated and insertable working plates
• Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates
• Formalin sink with sieve insert
• Mixing tap with detachable cold and hot water shower
• Exhaust duct
• Build in Illumination with “Daylight” Quality approx. 5000°K for direct photograph without additional Flashlights
• 2x 230 Volt Electric socket outlet

Technical Data

Dimensions Table W/D/H: 2100 x 1000 x 2000 mm
Dimensions Illumination: 2100 x 600 mm
Height adjustable: from 750 to 1000 mm
Exhaust Air capacity: 1600 m³/h
Material: Stainless steel (Material No. 1.4301 – ANSI 304)
Perforated working area: approx. 1540 x 920 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 250 mm
Type: UCS-E-2000-B
Article No.: 060.020.040

tekequipment.com

For more further information please contact : marketing@wmablog.com