Mechatronics Eurosens Dominator RS Fuel Level Monitoring

  • High-precision measurement
  • Output interfaces RS-232 & RS-485
  • Built-in temperature compensation
  • Modular design
  • Strong electronic circuit protection
  • Sealed automobile connector on the sensor body
  • Efficient packaging, installation, and sealing

Dominator fuel level sensors are designed to minimize the operating costs of a fuel consumption monitoring system for the entire period of its operation.

  • Powerful electronic module protection. External power voltage protection up to 170 volts.
  • The modular design allows not only cutting the sensor for a specific vessel but also extending the electrode. This is useful when you reinstall the system to another object. Sensors of traditional non-modular design can’t be extended and once shortened electrodes can’t be replaced.
  • Easy sealing of the sensor from disconnection cable and sensor removal.
  • The electrodes can be easily disassembled and cleaned. Sensors of conventional design can be contaminated in the gap between electrodes which requires complex maintenance. Dominator electrodes can be cleaned by the customer without warranty violations.
  • The modular design makes it easy to provide technical support for installed sensors. We can easily localize the problem either in the sensor “head” or in sensor electrodes because electrodes can be disconnected from the sensor “head”.
  •  If the fault is in the “head” of the sensor – replacement can be done even by the end user – the owner of the equipment. Thanks to Bayonetta, a fast-lock replacement is very easy and takes about 10 minutes. It is much cheaper than the travel costs of the installation staff.
  • After the sensor “head” replacement, you don’t need to make a tank calibration again
    (unlike traditional design sensors).
  • Warranty term – 5 years.

Application :

  • Remote fuel consumption monitoring
  • Local fuel monitoring
  • Gauge sensor for special machinery
  • Fuel theft alarm sensor

Specification :

Power voltage, V

10 – 60

Reverse polarity protection


Max error


Temperature range,°C

-40 – +85

Output interface

RS-232, RS-485, K-Line

Service interface

ISO 9141 (K-line)

Seal rating

IP 67 (for version Dominator RS-I: IP54)

Reference: mechatronics. by