Ryuki FLO-70 Rotameter Special Assembly

For laboratories, we can manufacture a combination of 2 to 5 stations, thermometers, pressure gauges, valves, and bases.

This is a high-precision area-type flow meter that can read the instantaneous flow rates of various liquids and gases directly from the scale indicated by the float. The flow rate can be adjusted freely by adjusting the valve. Used for general equipment and panel mounting in academic research institutions and other industries.

Model number :

FLO-L70 type (with a thermometer, pressure gauge, valve, and base)
FLO-L70 type (with a thermometer, 2 stations)
FLO-L70 type (special assembly)

General specifications :

Measuring fluid :

Liquid (water, cooling water, transparent liquid)
Gas (air, nitrogen, argon, carbon dioxide, etc.)

Scale range :

10: 1

Flow rate :

Liquid 7 70L / min
Gas 90-900NL / min

Body material :

Brass (BS), SUS304, SS, etc.

Tapered tube material :

Hard glass

Float material :

Liquid SUS304 SUS316
Gaseous aluminum

Packing :

NBR, CR (neoprene), Viton

Connection method :

Rc connection

Port size :

Refer to the measurement range table

Flow rate accuracy :

Within ± 2% FS

Mounting direction :

Vertical direction

Flow direction :

Please specify by model code

Maximum working pressure :

0.7MPa

Maximum operating temperature :

80 (Varies depending on the material)
Thermal shock 50 or less

External dimensions :

Refer to the measurement range table

Measurement range (Please contact us for other products as well.) :

Classification No

Flow rate display

Flow rate display

Port size

External dimensions mm

 

H2O (L / min)

AIR (NL / min)

Rc

 

0

0.001 to 0.01

0.01-0.1

1 / 4B

345

1

0.05-0.5

0.5-5

1 / 4B

345

2

0.2-2.0

5-50

1 / 4B

345

3

0.5-5

15-150

1 / 4B

345

4

1-10

20-200

1 / 2B

345

5

2-20

40-400

3 / 4B

475

6

4-40

60-600

1B

555

7

7-70

90-900

1B

565

● We will manufacture after confirming the fluid name, density, viscosity, pressure, temperature, flow range, connection standard, body material, packing material, etc.

● For liquid measurement (Float: SUS304, etc.)
* Density = 1.0 g / cm3 and viscosity = 1 cP as standard.

● For gas measurement (Float: Aluminum etc.)
* AIR 20 ° C is flown, and the flow rate value is converted to the standard state AIR, 0 ° C 1 atm (atmospheric pressure). (Unit: NL / min)
* Products are converted to standard conditions (atmospheric pressure 20 ° C) upon request. (Unit: SL / min)

Model code (please tell us when making an inquiry) :

Flow direction

Fluid

Classification

Wetted material

Valve

Packing material

Thermometer (t) / Pressure gauge (p)

Flow range, operating temperature, pressure

FLO-L70

-□

-□

-0 □

-T

-V

-P

-□

 

 

A [AIR]

0

BS

N [None]

1 [NBR]

0-None

 

2
[Lower horizontal (right) → Upper horizontal (left)]

W [Wed]

1

SUS304

U [top]

2 [CR (neoprene)]

1-pt available

 

Three
[Bottom side (left) → Topside (right)]

 

2

SS

D [bottom]

3 [FKM Viton]

2-t available

 

Four
[Behind the back → Back]

 

3

 

 

 

3-p available

 

 

 

4

 

 

 

Notices

 

 

 

5

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

7

 

 

 

 

 

* Details of the flow range, operating pressure, and temperature are required.
Please fill in if the fluid is other than air or water.
Consult us for fittings such as hose nipples, half unions, and elbow unions as accessories.

Model code entry example :
Example ① FLO-L70-3-A-02-TBS-VU-P1-1 Flow rate range 3 to 30NL / min, temperature 20 ℃, pressure 0.101MPa

Accessories: Not required Product image ⑦
Example ② FLO-L70-3-A-03-TBS-V0-P1-2-2 series flow rate range 5 to 20NL / min, temperature 20 ° C, pressure 0.101MPa (A)
FLO-L70-3-A-04-TBS-VU-P1-1-2 series flow rate range 20 ~ 200L / min, temperature 20 ℃, pressure 0.101MPa (A)
Accessories: Not required Product image 製品

About repeat products
Please tell us the serial number FM ○○○ ・ ・ ・ (○ is 5 to 6 digits) written on the nameplate when making an inquiry.

Reference:http://www.ryuki.jp


Another Article:

Berbagi:  

Komentar

Articles