Ryuki ODM-7000 Differential Pressure Flow Meter

 

Ryuki ODM-7000 Differential Pressure Flow Meter


The conventional ODM-7000 series has been supported by customers and has sold more than 100,000 units. This time, a new model has been added.

■ New product features
(1) Up to 2 contacts can be installed.
(2) The position of the terminal box can be freely specified up, down, left and right.
(3) Increased strength in consideration of material thickness.
④ Suitable for small to medium caliber lines.
(5) Combines the functions of the ODM7000 series.

● Measurement is possible even when the flow rate detection end and flow rate indicator are separated to a maximum horizontal distance of about 100m, and remote indication operation is possible.
● Since the main body is compact, it is easy to handle and can be easily installed in piping.
● The flow rate indicator has a mechanical structure, and the indication is extremely stable and reproducible.
● The indicator can be equipped with an electrical contact using a micro switch. It can send not only a flow rate instruction but also an alarm signal, and a maximum of two can be installed.
● Since the machine part of the indicator is in the atmosphere, it will not be corroded by fluid.
● Since the pressure receiving part of the indicator uses a diaphragm, it is sufficient for general use in terms of strength and temperature.
● The flow range can be easily changed by replacing the restriction mechanism (orifice).
● Only the indicator can be replaced as an assembly.
● A straight pipe is required before and after the flow rate detector.

Another Article:

Model number

  • ODM-7000S2DR type (2 contacts with stop valve)
  • ODM-7000SDR type (1 contact, with stop valve)
  • ODM-7000DR type (no contact, with stop valve)
  • ODM-7000S2ST type (2 contacts, without stop valve)
  • ODM-7000SST type (1 contact, no stop valve)
  • ODM-7000ST (no contact, no stop valve)

General specifications

Measuring fluidLiquid (water, industrial water,
cooling water, oils, other opaque liquids, etc.)
Port size15A to 300A
Flow rate15000L / min
Maximum working
pressure
1.0MPa
Maximum operating
temperature
100 ℃
Flow rate accuracyWithin ± 2% FS
Connection methodFlange type (JIS 5k JIS10k)
Body materialBrass (BS), PVC, SUS304, SUS316, etc.
Block materialBrass (BS), PVC, SUS304, SUS316, etc.
Orifice materialBrass (BS), PVC, SUS304, SUS316, etc.
Alarm contactUp to 2 can be installed.
Flow directionYou can choose freely.

Block dimensions

CaliberJIS 5KJIS 10K
154852
205258
256270
327280
407885
5088100
65112120
80125130
100145155
125180185
150210215
200255265
250320325
300365370

* Please contact us for ANSI and JIS16K.

Measurement range
(Please contact us for other products as well.)

Aperture (A)H2O (L / min)
154 ~ 20
8 ~ 40
208-40
12-60
2512-60
20-100
3220-100
30-150
4030-150
50-250
5050-250
80-400
6580-400
120-600
80120-600
200-1000
100200-1000
300-1500
125300-1500
500-2500
150500-2500
800-4000
200800-4000
1200-6000
2501200-6000
2000-10000
3002000-10000
3000-15000

Reference: http://www.ryuki.jp

 

 

Berbagi:  

Komentar

Articles