Seametrics SES- Single Jet Low Flow Meter


Stainless Flow Meter | Seametrics Single Jet Low Flow Meter | Turbine Paddle Flow Meter

The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high-quality jewel bearings results in long life and a relatively high tolerance for problem fluids. 

Seametrics SES- Single Jet Low Flow Meter

Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportioning of spray chemicals, and general flow rate monitoring. The sensor is easily replaced from outside the meter and is compatible with most of the Seametrics indicators and transmitters, as well as most controls and PLC’s that accept DC inputs.

The standard rotor is PVDF (Kynar®) and the shaft is special nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is Teflon®-coated Viton®.


  • Accurate at low flows
  • Simple and durable
  • Rugged body
  • High tolerance for problem fluids


  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Baca Juga :


Connection Ports1/2”, 3/4”, 1” —Female NPT thread
Sensor Cable18 ft (6 m) standard—maximum cable run 2000 ft (607 m
MaterialsBody316 stainless steel
 RotorPVDF (Kynar®)—2 magnet (6 magnets high-resolution optional
 ShaftNickel-bonded tungsten carbide (ceramic or silicon carbide optional)
 O-RingTeflon®-coated Viton®(Viton® or EDPM optional)
 BearingsRuby ring and ball
 Cover316 stainless steel
Maximum Temperature200 ̊ F (93 ̊ C)
Maximum Pressure500 psi (35 bar)
Accuracy±1% of the full scale
PowerStandard6–36 Vdc, < 2 mA
 Micropower3.1–16 Vdc, 60 μA @ 3.6 Vdc (for FT450 and DL76 only)
OutputsCurrent sinking pulse, 6–24 Vdc

Download Datasheet: Seametrics SES