Norgren Integrated Valve and Actuator Control (IVAC) Pneumatic

Integrated Valve and Actuator Control - IVAC – combines a linear actuator, a glandless control valve, two reed or solid-state switches, and speed controllers into one integrated product whilst still maintaining the dimension measurements in accordance with ISO 15552. With IVAC utilizing an integrated valve, therefore, reducing tubing requirements it offers increased energy efficiency saving energy usage by up to 50%, as well as reducing the number of parts needed to purchase, stock, and install on your machine.

• 32 ... 100 mm
• Cylinders and mountings conform to ISO 15552
• Complete functional unit with LED display
• A central electrical connector, polarity-safe
• Integrated 5/2 or 5/3 valve
• Additional output ports (2 & 4)
• Integrated flow regulator for speed control
• Integrated reed or solid-state switches
• Protection class IP67, suitable for the food and beverage sector
• Energy efficient

Specification

• Medium:

Compressed air, filtered, lubricated or non-lubricated Particles size: Class 7, ISO 8573 – 1 (dated 2001) Humidity and water content: Air supply must be dry. Corresponding to the application and working conditions the air must be dry enough to avoid condensation. The pressure dewpoint must be a minimum15° under the application and working conditions. Oil: Class4, ISO 8573 – 1 (dated 2001)

• Standard:

Based on ISO 15552 (length, mounting pitch and thread dimensions according to ISO 15552. Some outside dimensions different to ISO 15552)

• Operation: Double acting, magnetic piston,adjustable cushioning
• Operating pressure: 2 ... 8 bar (29 ... 116 psi)Port size:G1/8, G1/4, G3/8
• Cylinder diameters: 32, 40, 50, 63, 80, 100 mm
• Standard strokes: See below
• Non-standard strokes: Available (25 ... 1000 mm)
• Operating temperature:-2 ... +70°C max. (+28 ... +158°F)
• Supply voltage: 24 V d.c.
• Multipole connection: M12 x 1 male, 8 pin
• Power consumption: 1 W max
• Rating: 100 % E.D.
• Protection class: IP 67
• Life expectation of the cylinder: *1)

Stroke < 100 mm: 10 Mio. Cycles
Stroke > 100 mm: 5000 km

• Life expectation of the solenoid valves: 50 Mio. Cycles
• Materials:

Profile barrel: anodized aluminum,

End covers: pressure diecast anodized aluminum

Piston rod: stainless steel, see datasheet

Piston rod seals: PUR

Piston seals: PUR

O-rings: NBR

*1) Life expectation based on laboratory conditions (more details upon request):- Operating pressure: 8 bar- Compressed air: ISO 8573-1, Class 7-4-4- Ambient temperature: 20° C +/-10° C- Environment: Industrial plant, no contamination such as dust and/or moisture or similar- Position: horizontal- Sideload: max. transverse load approx. 1,3% of the theoretical force at 6 bar- Speed: 1,0 m/s for Ø 32 to 50 mm 0,7 m/s for Ø 63 to 100 mm- Frequency: < 20 cycles/min (in/out)

Download Datasheet: Nogren Integrated valve and actuator control (IVAC), cleanliness profile,

Reference: norgren.com

Read More Articles: 

• Airtech Vacuum Pumps
• Helical Gear Reducer Hansen M4 ACC 
• Hansen P4 Multistage Vertical Sumitomo Drive Technologies
• Sumitomo Cyclo Gearmotor with Torque Limiter 
• SEISA GC Coupling Sumitomo Drive Technologies