VS26 Series Norgren Pneumatic Valve Manifolds

VS26 Series Norgren Valve Manifolds

Valve manifolds are commonly used on machine installations to reduce assembly and downtime and provide easier fault diagnosis.

Medium
- Compressed air, filtered to 40 μm, lubricated or non-lubricated
Operation
- VS26G: Glandless spool valve, solenoid pilot actuated
- VS26S: Softseal spool valve, solenoid pilot actuated
Mounting
- Sub-base
- Ports 2+4
- NPTF 1/4, PIF 3/8, 8 mm, and 10 mm, G1/4
Operating pressure
- Maximum pressure: 145 psi (10 bar) VS26S models and VS26G solenoid pilot actuated valves with internal pilot supply, 232 psi (16 bar) VS26G solenoid pilot actuated valves with external pilot supply
- Details of minimum and maximum pilot pressure see datasheet.
Flow characteristics

Series	Function	Cv	l/min

VS26G: 5/2 1.02 1000

VS26G 5/3 1.02 1000

VS26S 2x2/2 1.17 1150

VS26S 2x3/2 1.27 1250

VS26S 5/2 1.37 1350

VS26S 5/3 1.37 1350

Ambient temperature
- 5°F to 122°F (-15°C to 50°C)
Medium temperature
- 23°F to 122°F (-5°C to 50°C)
- Consult our technical service for use below 35°F (2°C).
Materials
- Body/sub-base: die-cast aluminum
- Glandless spool & sleeve (VS26G): aluminum, hard anodized, PTFE coated
- Softseal spool (VS26S): aluminum with HNBR seals
- Plastic parts: POM, PA, PPA
- Mounting sheets/screws: steel, zinc coated
- Springs: stainless steel
- Sandwich plates: aluminum bar material
- Electrical contacts: brass, tin/gold coated
- PCB: glasepoxy