Woerner Lubrication

WOERNER products are instrumental in significantly lengthening the service life and efficiency of your machines, whilst lowering the input costs appreciably. Exact demand-led metering reduces lubricant usage and thus helps to protect the environment. At WOERNER, we use our knowledge and expertise coupled with state-of-the-art design and manufacturing technologies to develop and produce high-quality lubrication systems.

Virtually all plants and machinery can only operate properly if they are lubricated by a dedicated lubricant supply. WOERNER centralized lubrication systems reliably supply lubricant at precisely defined intervals and in specific quantities to the lubrication points. This minimizes wear, lengthens the service life quite considerably, and appreciably reduces input costs.

WOERNER designs and manufactures all the necessary components for centralized lubrication systems to the highest possible quality standards – whether as single components, turnkey projects, or tailored to your specific needs.

WOERNER products can be found in small systems in machine construction, in larger machines, or even in complex plants and machinery. Whether in machining centers, commercial vehicles, paper machines or wind turbines – we also develop the optimum solution to meet your particular needs. Take advantage of our outstanding performance!

 Woerner Product

Pumps 

Find different pumps for different lubrication applications with different drives.

Multi-line pumps

Multi-line pumps are pumps suitable for use with different lubricants, which discharge a defined quantity of lubricant through several outlets. A direct line leads from every outlet to the respective lubrication point.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       DMF-A Pump element

·       GMF-A..-D Piston pump

·       GMA-B...-C Piston pump

·       GMF-S01 Piston pump in steel design

·       GMO-A Pump aggregate 

·       GMG-A Pump aggregate

·       GMG-B Pump aggregate

·       GMG-K Pump aggregate

·       GMG-L Pump aggregate

·       PMW-A..-B Piston pump, pneumatically actuated

·       PMW-C Piston pump, pneumatically actuated

·       GME-E Pump aggregate

Compact- and Cartridge pumps

Compact and cartridge pumps are compact units that can serve a few points directly with micro-quantities of lubricant.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       GMK-B Piston Pump

·       GMK-B "Smart Control" Piston Pump

·       GMI-A Delivery Pump

·       GML-A Delivery Pump for Grease

·       GMV-A Piston Pump with Cartridge

·       GMV-B Piston Pump with Cartridge

·       GMV-C Piston Pump

·       PFD-C Metering Unit

Single-line pumps and aggregates

Single-line pumps and pump units are used to supply single-line distributors with lubricant. An inherent feature of the system is the fact that there needs to be pressure relief in the discharge line, therefore these units feature internal pressure relief systems for the supply line.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       GMG-LEZ Pump unit

·       PEK-A Single-line pump

·       GE51 Single line gear pump unit for fluid grease

·       GE71 Single line gear pump unit

·       GE75 Single line gear pump unit for fluid grease

·       GEZ-B..-C Single line gear pump

Dual-line Lubrication pumps

Dual-line pumps are used to supply dual-line systems with lubricant. The dual-line pump performs the reciprocal build-up and discharge of the two lines.

·       GMG-LEZ Pump unit

Drum pumps

Drum pumps transport lubricant directly from commercially available containers, such as buckets or drums. They are used as filling pumps or as supply pumps directly in centralized lubrication systems.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       935.120 Pneumatic drum pump

·       GMZ-E Drum pump

·       PFA-D Manually operated drum pump

·       PFS-C Filling pump

·       PFS-D Drum pump

Gear pumps

Gear pumps are mainly used in oil circulation systems to supply the centralised lubrication system.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       GFM-F..-G Gear pump

·       GFM-L01 Gear pump

·       GFM-N Gear pump

·       GFZ-B..-D Gear pump

·       GFZ-L Gear pump

·       GFZ-N Gear pump

Manual pumps

Manuals pumps are used when lubrication is only occasionally required and there is no energy supply.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

·       PFH-E Manual pump

·       PFH-L Manual pump

·       PFH-N Stainless steel manual pump

·       PFH-P Manual pump with progressive distributor

·       PFH-C Manual pump

Distributors
Our distributor's dose and distribute different lubricants with high repeat accuracy to different lubrication points.

Progressive Distributors

Progressive distributors continuously meter and distribute a supply of lubricant to different lubrication points.

A part of our product range is also suitable and certificated for hazardous areas (ATEX).

·       Progressive distributor in panel design: VPA-B, VPA-C (G1/4), VPA-C Special (G1/8), VPA-D, VPA-H, VPA-I

·       Progressive distributor in block design: VPB-B, VPB-G, VPB-F, VPB-H, VPB-VS01, VPB-VN01, VPB-SSV

·       Progressive distributor in a modular design: VPI-C, VPI-D

·       Progressive distributor with UNF threaded connections: VPI-E, VPI-F

·       Flange plates for VPI and VPA progressive distributors: VPA / VPI

Single-line Distributors

Single-line distributors meter and distribute lubricant based on the single-line principle.

Single-line distributors have some product such as VEB-D (modular design), VEI-A, VEI-F

Dual-line Distributors

Dual-line distributors meter and distribute lubricant based on the dual-line principle.

A part of our product range is also suitable and certificated for hazardous areas (ATEX)

Dual-line distributors have some products such as VZE-I, VZB-A (modular design), VZF-B

Volume-Flow Devices

Volumetric flow distributors meter and distribute continuous volumetric flows using an opening or throttle. The volumetric flow can also be monitored and measured, if required, using a float or gear.

A part of our product range is also suitable and certificated for hazardous areas ATEX

·       VUK-A Volume flow limiter

·       VUL-A Volume flow limiter

·       VUA-B Volume flow meter

·       KUI-A01 Volume flow indicator

·       KUI-B01 Volume flow indicator

·       KUI-F Volume flow indicator

·       KUI-M Volume flow indicator

·       KUZ-D Volume flow meter with throttle and bypass

·       KUZ-M Volume flow meter with throttle and bypass

·       ZUK-A Orifice holder

Oil-Air Distributors

Oil-air distributors meter the medium in an oil-air line. At the same time, the flow of pumped air can be adjusted by a throttle in an oil-air distributor.

A part of our product range is also suitable and certificated for hazardous areas ATEX

·       VOE-B Oil-air distributor

·       VOE-D01 Oil-air distributor with monitoring

Level switches, Temperature Switches & Volume Flow Measurement Devices
Different products for monitoring the level, temperature, and flow rate of liquids.

Level Switches

WOERNER level switches are used to monitor the liquid level in containers. Several switching points can be selected for the liquid level.

A part of our product range is also suitable and certificated for hazardous areas ATEX

·       Level Switch: KFA-A, KFA-V, KFE-A, KFH-..., KFH-E, KFI-A...-E, KFI-F, KFI-I, KFI-M, KFI-N, KFI-O, KFI-R, KFI-V, KFK-E, KFL-E, KFR-A, KFR-B, KFR-D, KFR-E, KFV-A (with approval automotive industry), FW-D (for dirty liquids), KFW-E (for dirty liquids), KFX-A, 752.711 (for drum pumps)

·       Ultrasonic sensor: KFU-A250

Level- and Temperature Switches

WOERNER level and temperature switches allow you to simultaneously monitor the liquid levels and limit temperatures in tanks.

A part of our product range is also suitable and certificated for hazardous areas ATEX.

Level- and Temperature Switches have some products such as KFA-A, KFA-V, KFI-O, KFI-R, KFR-A, KFR-B, KFR-E

Temperature Switches

Temperature switches can be used to trigger switching events, such as heating systems being switched on, depending on pre-set temperatures.

A part of our product range is also suitable and certificated for hazardous areas (ATEX)

Temperature Switches have some products such as KTR-B, KTR-D, KTR-F     

Volume Flow Measurement Devices

Flow gauges are used to determine the flow of medium in centralized lubrication systems.

A part of our product range is also suitable and certificated for hazardous areas ATEX

·       KPD Flow control

·       KUI-A01 Flow rate indicator

·       KUO-A Oval wheel meter

·       KUZ-X Volumetric flow meter

·       KUZ-F Volumetric flow meter

·       KUR-B Return flow control

Spray- and Jet Lubricators
WOERNER spray- and jet lubricators are used to lubricate moving lubrication points or to apply lubricant over a wide area.

Jet Lubricators

SAB-C Injection unit Jet Lubricators meter and spray drops of oil onto lubrication points. A part of our product range is also suitable and certificated for hazardous areas ATEX.

Spray Nozzles

Spray nozzles use compressed air to spray medium onto large-area lubrication points. A part of our product range is also suitable and certificated for hazardous areas ATEX

Mixing nozzle: SBB-A, SBE-B (air controlled), SBF-A-B-C, SBC-B

Spray Units

pray units meter and spray media onto large-area lubrication points using compressed air. A part of our product range is also suitable and certificated for hazardous areas ATEX.

Spray units have some products such as KTR-B, KTR-D, KTR-F          

Oil-Air Devices

WOERNER OIL Air devices dose lubricant into a compressed-air conveying line.

Oil-Air Units

GOI-A and GOK-B01 Oil-air units transport and meter medium in oil-air lines. At the same time the stream of transport air can be adjusted. A part of our product range is also suitable and certificated for hazardous areas ATEX

Oil-Air Distributors

VOE-B & VOE-D01 (with monitoring) Oil-air distributors meter the medium in an oil-air line. At the same time, the flow of pumped air can be adjusted by a throttle in an oil-air distributor. A part of our product range is also suitable and certificated for hazardous areas ATEX.

System Technology

WOERNER also offers a large selection of different units to supply centralized lubrication systems.

• Compact Power Unit
• Sealing Pressure Unit
• Hydraulic Test Benches 
• Large Power Units
• Customized Lubrication Solutions
  

Control & Monitoring Devices

WOERNER offers you a selection of control and monitoring devices, from stand-alone solutions to complex systems.

• Control Units
• Monitoring Units
  

Lubrication System Accessories

WOERNER offers you an extensive selection of different accessories for central lubrication systems.

• Reservoirs 
• Filters
• Tubes & Hoses 
• Pressure Relief Valves 
• Assembly Equipment 
• Fittings 
• Pressure Gauges 
• Pressure Switches 
• Dual-Line Accessories 
• Pneumatic Accessories

Source: www.woerner.de

·