Seametrics Electromagnetic Flow Meter WMP Series - Wiratama flow meter and technical part stock

Breaking

27.11.18

Seametrics Electromagnetic Flow Meter WMP Series

SEAMETRICS FLOWMETER - WMP SERIES - ELECTROMAGNETIC FLOWMETER


Electromagnetic Flow Meter WMP Series - Seametrics
The Seametrics WMP-Series is a full-bore, plastic-bodied electromagnetic fow meter designed for flow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspection*.With no moving parts, the magmeter permits unobstructed flow, minimizing flow disturbances and hence, straight pipe requirements. The WMP-Series can be used in piping confgurations where there is little space between the meter and an elbow or valve. The WMP-Series, like other magmeters, are resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, downtime and maintenance and repair costs are kept to a minimum. Because there are no mechanical parts in the flow stream, the meter tolerates high flows without damage.The hinged, opaque polyethylene cover protects from dust and
UV rays, while permitting easy access to the LCD fow rate and total display. The electronics housing is made of rugged powder-coated die-cast aluminum. It can be ftted with cross-drilled screws and seal wire for tamper-evidence. Flow rate and total can be displayed in a variety of units, customer-selected and factory-set.
  • No moving parts
  • Minimal straight pipe required
  • Battery powered
  • Corrosion resistant
  • Built-in rate & total indicator
  • Simple as a mechanical meter
The WMP-Series is used for tracking fow rate and total fow in usage monitoring applications, for instance, in compliance with regulatory requirements. These would include wells, industrial wastewater, heap leach mining discharge, cooling tower deduct metering, turf and landscape applications, and other water reclamation operations. In the event of DC power loss, or when changing the battery, the WMP is designed to retain the internal settings and flow total.
The WMP101 is externally powered via a 5-pin connector cable which also provides pulse output for use with a variety of Seametrics and other displays and controls for remote reading, data logging, pulse-to-analog conversion, and telemetry applications.
The WMP104 is a battery-operated unit for use when pulse output is not required. The standard batteries are user replaceable with an approximate 1-2 year life depending on usage. An extended battery life option offers an estimated 2-4 year life depending on usage.

FEATURES
• Simple as a mechanical meter
• No moving parts
• Minimal straight pipe required
• Battery powered
• Built-in rate & total indicator
• Corrosion resistant
• Pulse output (WMP101 only)

APPLICATIONS
Usage monitoring, such as:
• Industrial wastewater discharge monitoring
• Cooling tower deduct metering
• Heap leach mining discharge monitoring
• Well monitoring
• Turf and landscape water monitoring