Fuji - FST Spool Piece Ultrasonic Flowmeter


FST is an in-line ultrasonic flowmeter with three parallel measuring paths. With the latest digital signal processing technolgy and the calcilation algorithm, it can deliver highly precise flow measurement. RS-485 communication is also available as option.
Baca juga: WUF 100 CF Flowmasonic Clamp On Ultrasonic Flow Meter

Features

  • Highy accuracy : ±0.2% of rate
    • Using the new algorithm for calculating the flow velocity, it can measure any type of fluid with high accuracy.
  • Low maintenance
    • With no moving part, it has long-term stability while requiring only minimal maintance work.
  • Bubble resistant
    • By using the advanced anti-bubble measurement technology, the interface from air bubbles is greatly eliminated.
  • For any liquid from -40°C to +150° C
    • Non conductive fluid including oil, mixed liquid, purified, water can be measured.
  • Easy-to-operate
    • Backlit LCD and front keys
    • Troubleshooter provided
    • Can be vetically or horizontally installed

Specifications

Measuring Principle Transit time difference method
Parallel 3-path with the advanced ABM (anti-bubble measurement) system
Accuracy 0.2% of rate ( Flow velocity 1 m/s to 10 m/s
0.002% m/s (flow velocity 0.5 m/s to 1 m/s)
Diameter (mm) 25 (under development), 50, 80, 100
Flow Velocity Range Minimum: 0 to 0.3 m/s or -0,3 to 0 m/s
Maximum: 0 to 10 m/s or -10 to 0 m/s
Flow Range
Diameter (mm) 25 50 80 100
Minimum (m³/h) 0 t0 0.54 0 to 2.13 0 to 4.65 0 to 7.99
Maximum (m³/h) 0 to 17.6 1 to 70.6 0 to 154.8 0 to 266.0
Dimension and Weight Refer to outline diagram
Power Supply 100-240V AC (+10% - 15%), 50/60 Hz or 20-30V DC
Power Consumption Approx. 20 VA ( AC Power)
Approx. 6 W (DC Power)
Enclosure IP66
Ambient temperature -40º C to +60º C
Liquid Temperature -40ºC to +150º C
Bubble Content ≤12 vol %
Berbagi:  

Komentar

Articles