Fluidwell F110 Flow rate Indicator / Totalizer

F110 Intrinsically Safe – Flow rate Indicator / Totalizer with analog and pulse outputs

The F110 flow transmitter is the most popular model in our range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The display shows flow rate, total and accumulated total. On-screen engineering units are easily configured from a comprehensive selection.

Advantages

  • Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X) .
    It is so rugged, a truck can even stand on it!
  • Intrinsically Safe available – ATEX and IECEx approval for gas and dust applications.
  • Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
  • Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Features

  • Analog and pulse outputs.
  • Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
  • Displays total and flow rate simultaneously.
  • Separate engineering units for flow rate and total on the display.
  • Large digit selection for flow rate or total.
  • Total – resettable: seven 17mm (0.67″) digits.
  • LED backlight.
  • Accumulated total – not resettable: eleven 8mm (0.31″) digits.
  • Remote control input to reset total or to lock the “clear total” button.
  • Intrinsically safe according ATEX and IECEx.
  • Ambient temperature: -40°C to +80°C (-40°F to 176°F).
  • GRP, Aluminum or high grade stainless steel enclosure.
  • Auto backup of settings and running totals in EEPROM memory.
  • Various accessories are available for this product.

Applications

  • Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
  • The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Specification

Signal Inputs

  • Flowmeter Inputs

    • Pulse type inputs:
      Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
    • (0)4 – 20mA.

Signal Outputs

  • Pulse outputs

    • Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
      Max. frequency: 500Hz.
      Adjustable pulse length from 0.001 sec. to 9.999 seconds.
    • Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.
  • Alarm outputs

    • None
  • Analog outputs

    • Function: Re-transmitting the flow rate – the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).
    • Type: One passive isolated, floating or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.

Supply

  • Power Supply

    • Long-life Lithium battery.
    • 4 – 20mA, input Loop-powered.
    • 8 – 24V AC/DC.
    • 115 – 230V AC.
    • Basic: 8 – 30V DC.
  • Sensor Supply

    • 3.2, 8.2, 12, 24V DC.

Hazardous Area

  • Intrinsically Safe

    • ATEX:
      Gas: II 1 G Ex ia IIC T4 Ga
      Dust: II 1 D Ex ia IIIC T100°C Da
    • IECEx:
      Gas: Ex ia IIC T4 Ga
      Dust: Ex ia IIIC T100°C Da
    • CSA:
      I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4
    • FM:
      I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4
  • Explosion Proof

    • ATEX:
      Gas: II 2 G / Ex d IIB T5 Gb
      Dust: II 2 D / Ex t IIIB T100°C Db

Communication

    • Modbus communication is available on F1-Series products.
    • HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.

Download Datasheet: Fluidwell F110Flow Rate/Totalizer Indicator

Berbagi:  

Komentar

Articles