Bamo Alarm System for Oil-Water Separators NivOil® / 230 V AC

Alarm System for Oil-Water Separators NivOil® / 230 V AC


Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Alarm System for Oil-Water Separators NivOil® / 230 V AC

Designed for the monitoring of hydrocarbon fluids separators, the alarm device NIVOIL may be connected to 1, 2, or 3 sensors.

  • Hydrocarbon layer thickness sensor to detect when the maximum thickness is reached.
  • Overfill sensor to detect when the fluids are on the highest level; this can occur in case of dysfunction of a filter when a float-valve closes to prevent an overfilling when the level of fluid is too high.
  • Sludge layer sensor to alarm when maintenance is necessary.

The 3 sensors may be connected to any input of the alarm device NIVOIL. Any combination of the sensors can be wired. The instrument recognizes automatically the sensor type. A LED indicates the sensor type on the diagram on the front board. When an input is not wired, the LED is off.The alarm device NIVOIL has a built-in buzzer; it is possible to disable its function by a DIP switch configuration.

Features

  • 3 inputs, for any NIVOIL probes
  • Automatic recognition of type probe
  • 3 relay outputs
  • Audible alarm disable by DIP switch
  • Front system drawing with lightning alarms
  • Wall mounting cabinet, IP 65
  • Intrinsic safety acc.: Ex II (1) G [Ex ia] IIB
  • Certification: BVS 07 ATEX E 090
  • Suspended cable probes with 10 m long cable

 

Another Article:

Specification

Main power supply:230 V - 50 Hz
Power consumption:9 VA approximately (3 sensors connected)
Housing protection:IP65, according to EN 60529
Temperature limits:-20...+60°C
Sensor inputs:3 inputs with automatic sensor type detection for hydrocarbon fluids
 layer thickness, overfill level, sludge layer level
Monitoring:The alarm device NIVOIL has an auto-diagnostic measuring loop.
 An alarm signal occurs in case of dysfunction due to a short circuit
 or a broken cable.
Display and signals:1 function signal LED (green) on each channel
 1 alarm signal LED (red) on each channel
 Built-in audible alarm, disabled by DIP switch configuration
Outputs:3 relay outputs, 230 V AC, 3A, potential free change over contacts
ATEX Certificate:BVS 07 ATEX E 090
Ex protection class:II (1) G [Ex ia] IIB (Intrinsic safety)
 / The alarm device NIVOIL must be mounted in a safe area
CE MarksAccording to EC directives (72/23/EEC), Low Voltage Guidelines: RL 2006/95/EG & RL93/68/EWG,
 EMV Guidelines: RL 89/336/EWG (EN 61326)
ATEXRL 94/9/EG (ATEX 95)
 EN 60079-0 (General requirements) - EN 60079-11 (Intrinsic safety) - EN 60079-26 (Group II; category 1G)

Download Data Sheet: Alarm System for Oil-Water Separators NivOil® / 230 V AC

Ref: bamo.eu

Berbagi:  

Komentar

Articles