Bamo Level Controllers and Indicators CF3/CF4 Series - Wiratama Mitra Abadi | Industrial Equipment

Breaking

28.12.20

Bamo Level Controllers and Indicators CF3/CF4 Series

Bamo Level Controllers and Indicators CF3/CF4 Series  Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.  Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.  Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.  Bamo Level Controllers and Indicators CF3/CF4 Series | Descriptions  The electric gauge is mounted above the tank. Against the liquid height, the float transmits the level through an angle drive to a vertical stem. The stem actuates on a pointer associated with a graduated dial to display the level in the tank. Depending on the model, it can also act on contacts, and/ or a potentiometer which will deliver an ohmic value image of measurement.  The instrument is available with several functions 1 continuous signal output (Ω) Display for direct reading of level For commodity, the level is visible on 2 opposite sides. 1 to 3 contacts (potential free) Option: on request up to 5 contacts  The complete system is supplied ready to install and to use.  Features Tank height from 250 to 3000 mm Transmission: angle drive Fitting: male 2” BSP Head housing: IP 54 3 possible functions: Direct reading With 1 to 3 contacts, potential free Output signal: continuous resistive signal (Ω) Application  Gauge for level display and filling control.  Diesel in storage tank or day-tank Stored lubricating oil, glycol water, rainwater  Particularly suited to meet the needs and conditions of use for storage tank or day-tank of diesel generators.  Another Article:  Hengesbach Level Module for Installation in Level Probes Tyoe NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor Specification Materials	Steel, Nylon  	Float: Foamed PVC Flange seal	Cork gasket Fitting	2” BSP, male Head housing	IP 54 Operating pressure	Atmospheric Operating temperature	Between 0 and 40 °C Measuring distances	Model 1: From 250 up to 1100 mm  	Model 2: From 1100 up to 3000 mm Scale:	Liters Contact(s)	Default setting:  	Filling function: ON at 50 % and OFF at 80 % capacity  	(2-way contact, 10 A, 230 V, potential free)  	- High level: 90 % capacity  	(Change-over contact, 10 A, 230 V, potential free)  	- Low level alarm: 30 % capacity  	(Change-over contact, 10 A, 230 V, potential free)  	On request: Factory adjustment between 10 and 90%. Output, resistive signal	From 0 to 90 Ω (approx., ±15 %)  Ref: bamo.eu  Contact us: sales@wmablog.com or visit our E-Commerce  Download Data Sheet: Level Controllers and Indicators CF3/CF4 Series


Bamo Level Controllers and Indicators CF3/CF4 Series[

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Level Controllers and Indicators CF3/CF4 Series | Descriptions

The electric gauge is mounted above the tank. Against the liquid height, the float transmits the level through an angle drive to a vertical stem. The stem actuates on a pointer associated with a graduated dial to display the level in the tank. Depending on the model, it can also act on contacts, and/ or a potentiometer which will deliver an ohmic value image of measurement.

The instrument is available with several functions

  • 1 continuous signal output (Ω)
  • Display for direct reading of level
    • For commodity, the level is visible on 2 opposite sides.
  • 1 to 3 contacts (potential free)
    • Option: on request up to 5 contacts

The complete system is supplied ready to install and to use.

Features

  • Tank height from 250 to 3000 mm
  • Transmission: angle drive
  • Fitting: male 2” BSP
  • Head housing: IP 54
  • 3 possible functions:
    • Direct reading
    • With 1 to 3 contacts, potential free
    • Output signal: continuous resistive signal (Ω)

Application

Gauge for level display and filling control.

  • Diesel in storage tank or day-tank
  • Stored lubricating oil, glycol water, rainwater

Particularly suited to meet the needs and conditions of use for storage tank or day-tank of diesel generators.

Another Article:

Specification

MaterialsSteel, Nylon
 Float: Foamed PVC
Flange sealCork gasket
Fitting2” BSP, male
Head housingIP 54
Operating pressureAtmospheric
Operating temperatureBetween 0 and 40 °C
Measuring distancesModel 1: From 250 up to 1100 mm
 Model 2: From 1100 up to 3000 mm
Scale:Liters
Contact(s)Default setting:
 Filling function: ON at 50 % and OFF at 80 % capacity
 (2-way contact, 10 A, 230 V, potential free)
 - High level: 90 % capacity
 (Change-over contact, 10 A, 230 V, potential free)
 - Low level alarm: 30 % capacity
 (Change-over contact, 10 A, 230 V, potential free)
 On request: Factory adjustment between 10 and 90%.
Output, resistive signalFrom 0 to 90 Ω (approx., ±15 %)

Ref: bamo.eu

Contact us: sales@wmablog.com or visit our E-Commerce

Download Data Sheet: Level Controllers and Indicators CF3/CF4 Series

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :